Professor David Taylor
Fellow Emeritus, Mechanical, Manuf & Biomedical Eng
Biography
David Taylor is an Emeritus Professor in the Department of Mechanical, Manufacturing and Biomedical Engineering. He is a Member of the Royal Irish Academy. He holds degrees of MA, PhD and ScD from the University of Cambridge and Fellowships from Engineers Ireland and the Royal Academy of Medicine in Ireland.
Publications and Further Research Outputs
Peer-Reviewed Publications
Benson J, Wickham C, Rowan T and Taylor D, Predicting the Degradation of Slip Resistance in Paving Materials, WEAR, 512, 2023, p204520
Taylor D, Mechanical fatigue in trees mitigated by annual growth: a theoretical model, Journal of Theoretical Biology, 569, 2023, p111523 - 111523
Chaves C, Balbin JA, Navarro A, Susmel L and Taylor D, ) Calculations of biaxial fatigue limits with models using the experimental crack direction, International Journal of Fatigue, 2023, p107726 - 107726
Bobby Gillham, Andrei Yankin, Fionnan McNamara, Charles Tomonto, Chunjie Huang, Jeroen Soete, Garret O'Donnell, Daniel Trimble, Shuo Yin, David Taylor, Rocco Lupoi, Tailoring the Theory of Critical Distances to better assess the combined effect of complex geometries and process-inherent defects during the fatigue assessment of SLM Ti-6Al-4V, International Journal of Fatigue, 172, 2023, p107602
Krueger ET, Büscher JV, Hoey DA Taylor D, O'Reilly PJ, Crowley QG, Wanted Dead or Alive: Skeletal Structure Alteration of Cold-Water Coral Desmophyllum pertusum (Lophelia pertusa) from Anthropogenic Stressors, Oceans, 4, (1), 2023, p68 - 79
Marsavina L, Sapora A, Susmel L and Taylor D, The application of the theory of critical distances to non-homogenous materials., Fatigue and Fracture of Engineering Materials and Structures, 46, (4), 2023, p1314 - 1329
S Brooks, R Roy, J-H Dirks and D Taylor, A systematic study of biological SE systems from complexity and design perspectives., Journal of Engineering Design, 34, (11), 2023, p897 - 921
O'Keeffe, C. and Taylor, D. and Lally, C. and Kelly, D.J., Morphological induced improvements in the bulk mechanical properties of chemically etched additively manufactured Ti-6Al-4V micro-struts, Additive Manufacturing, 75, (103748), 2023
Seibert P, Taylor D, Berto F and Razavi S(, Energy TCD " Robust and simple failure prediction unifying the TCD and ASED criterion, Engineering Fracture Mechanics, 271, 2022, p108652
Chaves V, Navarro A, Susmel L and Taylor D , Analysis of biaxial fatigue limit models for cases with circular notches, INTERNATIONAL JOURNAL OF FATIGUE, 162, 2022, 106981
Bobby Gillham, Andrei Yankin, Harry Shipley, Fionnan McNamara, Charles Tomonto, Garret O'Donnell, Daniel Trimble, Shuo Yin, David Taylor, Rocco Lupoi, The Analysis of Small-Scale Notches on the Fatigue Performance of SLM Ti-6Al-4V; A Theory of Critical Distances Approach, Key Engineering Materials, 926, 2022, p250 - 267
Morgan D, Quinlan S and Taylor D , Using the theory of critical distances to predict notch effects in fibre composites, Theoretical and Applied Fracture Mechanics, 118, 2022, p103285
Hone T, Kelehan S and Taylor D , Fracture and repair in a bioinspired self-healing structure, Fatigue and Fracture of Engineering Materials and Structures, 44, 2021, p3373 - 3383
Schmidt A and Taylor D, Erosion of soft tissue by polypropylene mesh products, Journal of the Mechanical Behavior of Biomedical Materials, 115, 2021, p104281
Hone T, Mylo M, Speck O, Speck T and Taylor D , Failure mechanisms and bending strength of fuchsia magellanica v gracilis stems, Journal of the Royal Society Interface, 18, 2021, p20201023
Schmidt A, O'Brien G and Taylor D, The development of equipment to measure mesh erosion of soft tissue, Materials, 14, 2021, p1 - 13
Bobby Gillham, Andrey Yankin, Fionnan McNamara, CharlesTomonto, David Taylor, Rocco Lupoi, Application of the Theory of Critical Distances to predict the effect of induced and process inherent defects for SLM Ti-6Al-4V in high cycle fatigue, CIRP Annals - Manufacturing Technology, 70, (1), 2021, p171 - 174
Taylor D, Analysis of Fracture Data from Notched Specimens Can Provide Information on Multiscale Toughening Mechanisms, Theoretical and Applied Fracture Mechanics, 109, 2020, p102730
Taylor D and Barton E, In-vitro characterization of the erosion of soft tissues by surgical mesh, Journal of the Mechanical Behavior of Biomedical Materials, 101, 2020, 103420
Schmidt J, O"Neill M, Dirks J-H and Taylor D , An investigation of crack propagation in an insect wing using the theory of critical distances, Engineering Fracture Mechanics, 2020, p107052
Hone T, Cahill, L, Robinson T, Korde C and Taylor D , The splitting of bamboo in response to changes in humidity and temperature, Journal of the Mechanical Behavior of Biomedical Materials, 111, 2020, p103990
Harford N, O"Connor N and Taylor D (, Impact resistance of limpet shells: a study of local adaptations, Applied Physics A, 126, 2020, p757
Palomba G, Hone T, Taylor D and Crupi V, Bio-inspired protective structures for marine applications, IDFC-4, Belfast, 1986, 15, 2020, pp056016
O'Neill M and Taylor D, Repair of Microdamage caused by Cyclic Loading in Insect Cuticle., Journal of Experimental Zoology Part A., 333, 2019, p20 - 28
Lefevre B, O'Reilly P, West R and Taylor D, A new method for joining bamboo culms, Engineering Structures, 190, 2019, p1 - 8
Taylor D, The theory of critical distances applied to multiscale toughening mechanisms, Engineering Fracture Mechanics, 209, 2019, p392 - 403
Taylor D, Through-life engineering: inspirations from nature, Procedia Manufacturing, 16, 2019, p163 - 170
O'Neill, M. and Cafiso, D. and Mala, R. and La Rosa, G. and Taylor, D., Fracture toughness and damage development in limpet shells, Theoretical and Applied Fracture Mechanics, 96, 2018, p168-173
Oâ Neill, M. and Mala, R. and Cafiso, D. and Bignardi, C. and Taylor, D., Repair and remodelling in the shells of the limpet Patella vulgata, Journal of the Royal Society Interface, 15, (145), 2018
Taylor, D., Observations on the role of fracture mechanics in biology and medicine, Engineering Fracture Mechanics, 423, 2018, p422-430
Taylor, D., Measuring fracture toughness in biological materials, Journal of the Mechanical Behavior of Biomedical Materials, 77, 2018, p776-782
O'Neill, M, DeLandro D and Taylor D, Age related responses to injury and repair in insect cuticle, Journal of Experimental Biology, 222, 2018, pjeb182253
Santus, C. and Taylor, D. and Benedetti, M., Determination of the fatigue critical distance according to the Line and the Point Methods with rounded V-notched specimen, International Journal of Fatigue, 106, 2018, p208-218
Santus C, Taylor D and Benedetti M , Experimental determination and sensitivity analysis of the fatigue critical distance obtained with rounded V-notched specimen. , International Journal of Fatigue, 113, 2018, p113 - 125
Taylor, D., The failure of polypropylene surgical mesh in vivo, Journal of the Mechanical Behavior of Biomedical Materials, 88, 2018, p370-376
Rajabi, H. and Bazargan, P. and Pourbabaei, A. and Eshghi, S. and Darvizeh, A. and Gorb, S.N. and Taylor, D. and Dirks, J.-H., Wing cross veins: an efficient biomechanical strategy to mitigate fatigue failure of insect cuticle, Biomechanics and Modeling in Mechanobiology, 16, (6), 2017, p1947-1955
Taylor, D., The Theory of Critical Distances: A link to micromechanisms, Theoretical and Applied Fracture Mechanics, 90, 2017, p228-233
Dooley C, Taylor D, Self-healing materials: What can nature teach us?, Fatigue and Fracture of Engineering Materials and Structures, 2017, p655-669
Cicero, S. and Cendón, D. and Taylor, D. and Berto, F., Editorial â" Mechanics of notches, Theoretical and Applied Fracture Mechanics, 90, 2017, p203
Vargiu, F. and Sweeney, D. and Firrao, D. and Matteis, P. and Taylor, D., Implementation of the Theory of Critical Distances using mesh control, Theoretical and Applied Fracture Mechanics, 92, 2017, p113-121
Parle E, Taylor D, The effect of aging on the mechanical behaviour of cuticle in the locust Schistocerca gregaria, Journal of the Mechanical Behavior of Biomedical Materials, 68, 2017, p247 - 251
PresbÃtero, G. and Gutiérrez, D. and Taylor, D., Osteoporosis and fatigue fracture prevention by analysis of bone microdamage, Minerals, Metals and Materials Series, Part F6, 2017, p319-330
Torres AM, Matheny JB, Keaveny TM, Taylor D, Rimnac C and Hernandez CJ , Material heterogeneity in cancellous bone promotes deformation recovery after mechanical failure, PNAS, 113, 2016, p2892 - 2897
Parle E, Dirks J.-H, Taylor D, Damage, repair and regeneration in insect cuticle: The story so far, and possibilities for the future, Arthropod Structure & Development, 46, (1), 2016, 49-55
Parle E, Dirks J-H and Taylor D, Bridging the gap: wound healing in insects restores mechanical strength by targeted deposition, Journal of the Royal Society Interface , 13, 2016, p20150984 - 20150984
Taylor D, Walsh M, Cullen A and O'Reilly P, The fracture toughness of eggshell, Acta Biomaterialia , 37, 2016, p21 - 27
Taylor D, Impact damage and repair in shells of the limpet Patella vulgata, Journal of Experimental Biology, 219, (24), 2016, p3927 - 3935
Parle E, Larmon H and Taylor D , Biomechanical factors in the adaptations of insect tibia cuticle, PLoS ONE , 11, 2016, p0159262 - 0159262
Parle E, Herbaj S, Shiels F, Larmon H and Taylor D , Buckling failures in insect exoskeletons. , Bioinspiration and Biomimetics , 11, 2015, p016003 - 016003
Fatigue and Creep Failure in Musculoskeletal Tissues in, editor(s)Saleem Hashmi , Reference Module in Materials Science and Materials Engineering, Oxford, UK, Elsevier, 2015, pp1 - 71, [David Taylor]
David Taylor, Fatigue resistant components: what can we learn from Nature?, Journal of Mechanical Engineering Science (Proc I Mech E Part C), 229, 2015, p1186 - 1193
Lauren Mulcahy, C Curtin, R McCoy, David Taylor, T Clive Lee and Garry Duffy, The effect of bisphosphonate treatment on the biochemical and cellular events during bone remodelling in response to microinjury stimulation, European Cells and Materials, 30, 2015, p271 - 281
Rajabi, H. Darvizeh, A. Shafiei, A. Taylor, D. Dirks, J.-H., Numerical investigation of insect wing fracture behaviour, Journal of Biomechanics, 48, (1), 2015, p89 - 94
Keogh, L., O'Hanlon, P., O'Reilly, P., Taylor, D., Fatigue in bamboo, International Journal of Fatigue, 75, 2015, p51-56
David Taylor, 'Cover Painting for the journal "Theoretical and Applied Fracture Mechanics"', Elsevier, 2014, -
Bernasconi, A. Cosmi, F. Taylor, D., Analisys of the fatigue properties of different specimens of a 10% by weight short glass fibre reinforced polyamide 6.6, Polymer Testing, 40, 2014, p149 - 155
Benedetti, M., Fontanari, V., Bergamini, D., Bandini, M., Taylor, D., Multiaxial fatigue resistance of shot peened high-strength aluminium alloys, Conference Proceedings of the Society for Experimental Mechanics Series, 8, 2014, p235-243
Dooley, C., Cafferky, D., Lee, T.C., Taylor, D., Fatigue failure of osteocyte cellular processes: Implications for the repair of bone, European Cells and Materials, 27, 2014, p39-49
Long, T. Qin, J. Atahan, P. Mooney, S. Taylor, D., Rising waters: New geoarchaeological evidence of inundation and early agriculture from former settlement sites on the southern Yangtze Delta, China, The Holocene, 24, (5), 2014, p546 - 558
Taylor, David, Art in Fracture: The making of the new cover for Theoretical and Applied Fracture Mechanics, Theoretical and Applied Fracture Mechanics, 2014
Taylor, D. Kinane, B. Sweeney, C. Sweetnam, D. O-Reilly, P. Duan, K., The biomechanics of bamboo: investigating the role of the nodes, Wood Science and Technology, 49, (2), 2014, p345 - 357
Mc Guinness, S. Taylor, D., Farmers' Perceptions and Actions to Decrease Crop Raiding by Forest-Dwelling Primates Around a Rwandan Forest Fragment, Human Dimensions of Wildlife: An International Journal, 19, (2), 2014, p179 - 190
Mulargia, S. Dooley, C. Cristofolini, L. Taylor, D., Fracture and fatigue in osteocytes, Journal of the Mechanical Behavior of Biomedical Materials, 39, 2014, p231 - 237
Taylor, D., Fracture mechanics: Inspirations from nature, Fracture & Structural Integrity, 30, 2014, p1 - 6
Benedetti, M., Fontanari, V., Bandini, M., Taylor, D., Multiaxial fatigue resistance of shot peened high-strength aluminum alloys, International Journal of Fatigue, 61, 2014, p271-282
Susmel, L. Askes, H. Bennett, T. Taylor, D., Theory of Critical Distances versus Gradient Mechanics in modelling the transition from the short to long crack regime at the fatigue limit, Fatigue and Fracture of Engineering Materials and Structures, 36, (9), 2013, p861 - 869
Jennings, E., Allott, N., Lenihan, D, Drivers of long-term trends and seasonal changes in total phosphorus loads to a mesotrophic lake in the west of Ireland, Marine and Freshwater Research, 64, (5), 2013, p413 - 422
Susmel L and Taylor D , The theory of critical distances to estimate finite lifetime of notched components subjected to constant and variable amplitude torsional loading, Engineering Fracture Mechanics , 98, 2013, p64 - 79
Dirks, J.-H., Parle, E., Taylor, D., Fatigue of insect cuticle, Journal of Experimental Biology, 216, (10), 2013, p1924-1927
Tisbo, P., Taylor, D., Simulation of microcrack growth and repair in living bone, WIT Transactions on Biomedicine and Health, 17, 2013, p193-203
O'Dwyer, B. Crockford, L. Jordan, P. Hislop, L. Taylor, D., A palaeolimnological investigation into nutrient impact and recovery in an agricultural catchment, Journal of Environmental Management, 124, 2013, p147 - 155
Dirks J-H and Taylor D , Fracture toughness of locust cuticle, Journal of Experimental Biology , 215, 2012, p1503 - 1508
Reilly, G., Taylor, D., Application of General Linear Modeling (GLM) to analysis of indentation in compact bone, AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, 2012, p153-160
Dooley C, Tisbo P, Lee TC and Taylor D, Rupture of osteocyte processes across microcracks: the effect of crack length and stress, Biomechanics and Modeling in Mechanobiology , 11, 2012, p759 - 766
Taylor D and Dirks J-H , Shape optimization in exoskeletons and endoskeletons: a biomechanics analysis, Journal of the Royal Society Interface , 9, 2012, p3480 - 3489
Susmel L and Taylor D , Sulla stima di macro, micro e nano-durezza di materiali metallic mediante analisi elasto-plastiche agli elementi finite (Estimating macro, micro and nano-hardness of metallic materials from elasto-plastic finite element results). , Frattura ed integrita strutturale , 19, 2012, p37 - 50
Susmel L and Taylor D, A critical distance/plane method to estimate finite life of notched components under variable amplitude uniaxial/multiaxial fatigue loading, International Journal of Fatigue, 38, 2012, p7 - 24
Taylor, D. , The "House Style" of JMBBM (Editorial), 2012, - iii
Presbitero G, O'Brien FJ, Lee TC and Taylor D, Distribution of microcrack lengths in bone in vivo and in vitro, Journal of Theoretical Biology , 304, 2012, p164 - 171
David Taylor, Niamh O'Mara, Eoin Ryan, Michael Takaza, Ciaran Simms, The fracture toughness of soft tissues, Journal of the Mechanical Behavior of Biomedical Materials, 6, 2012, p139-147
Susmel L and Taylor D, Taking full advantage of nominal stresses to design notched components against variable amplitude multiaxial fatigue, Key Engineering Materials, 488-489, 2012, p747 - 750
Dirks J-H and Taylor D , Veins improve fracture toughness of insect wings, PLoS ONE , 7, 2012, pe43411
Taylor, D., Two special issues: Natural materials and ICMOBT-3 proceedings, Journal of the Mechanical Behavior of Biomedical Materials, 4, (5), 2011, p625
Qin, J., Taylor, D., Atahan, P., Zhang, X., Wu, G., Dodson, J., Zheng, H., Itzstein-Davey, F., Neolithic agriculture, freshwater resources and rapid environmental changes on the lower Yangtze, China, Quaternary Research, 75, (1), 2011, p55-65
L. Susmel, B. Atzori, G. Meneghetti, D. Taylor, Notch and Mean Stress Effect in Fatigue as Phenomena of Elasto-Plastic Inherent Multiaxiality, Engineering Fracture Mechanics, 78, (8), 2011, p1628-1643
Taylor, D. , Introducing Our New Associate Editor: Pekka Vallittu (Editorial), 2011, - 128
Kasiri, S., Kelly, D.J. Taylor, D. , Can The Theory of Critical Distances Predict the Failure of Shape Memory Alloys?, Computer Methods in Biomechanics and Biomedical Engineering , 14, (6), 2011, p491-496
David Taylor, Andrew Kelly, Matteo Toso, Luca Susmel, The Variable Radius Notch: Two New Methods for Reducing Stress Concentration, Engineering Failure Analysis, 18, (3), 2011, p1009-1017
Taylor D, Inside or outside: where to put the skeleton?, Materials Today, 14, 2011, p62 - 63
Simone Capetta, Roberto Tovo, David Taylor and Paolo Livieri, Numerical Evaluation of Fatigue Strength on Mechanical Notched Components under Multiaxial Loadings, International Journal of Fatigue, 33, (5), 2011, p661-671
Greene, S., Taylor, D., McElarney, Y.R., Foy, R.H., Jordan, P., An evaluation of catchment-scale phosphorus mitigation using load apportionment modelling, Science of the Total Environment, 409, (11), 2011, p2211-2221
David Taylor, What we can't learn from nature, Materials Science and Engineering: C, 31, (6), 2011, p1160-1163
Naili, S., van Rietbergen, B., Sansalone, V., Taylor, D. , Bone remodeling, 2011, - 827-828
Lauren E. Mulcahy, David Taylor, T. Clive Lee and Garry P. Duffy, RANKL and OPG activity is regulated by injury size in networks of osteocyte-like cells, Bone, 48, (2), 2011, p182-188
Luca Susmel, David Taylor, The Theory of Critical Distances to estimate lifetime of notched components subjected to variable amplitude uniaxial fatigue loading, International Journal of Fatigue, 33, (7), 2011, p900-911
Taylor, D., The words we use, Journal of the Mechanical Behavior of Biomedical Materials, 4, (1), 2011, p1
Taylor, D. , Do Editors Make a Difference?, 2011, - 921
Hoey D and Taylor D, The effect of mixing technique on fatigue of bone cement when stress concentrations are present., International Journal of Nano and Biomaterials, 3, 2010, p36 - 48
Kasiri S, Reilly G and Taylor D , Wedge indentation fracture of cortical bone: experimental data and predictions, Journal of Biomechanical Engineering , 132, 2010, p1 - 6
Susmel, L., Taylor, D., The Theory of Critical Distances to estimate the static strength of notched samples of Al6082 loaded in combined tension and torsion. Part II: Multiaxial static assessment , Engineering Fracture Mechanics, 77, (3), 2010, p470-478
Taylor, D., Different Types of Article in JMBBM, Journal of the Mechanical Behavior of Biomedical Materials, 3, (1), 2010, p1
Cornetti P, Taylor D and Carpinteri A, An asymptotic matching approach to shallow notched structural elements, Engineering Fracture Mechanics, 77, 2010, p348 - 358
Taylor D, Why are your bones not made of steel?, Materials Today, 13, (3), 2010, p6 - 7
Susmel, L., Taylor, D., The Theory of Critical Distances to estimate the static strength of notched samples of Al6082 loaded in combined tension and torsion. Part I: Material cracking behaviour , Engineering Fracture Mechanics, 77, (3), 2010, p452-469
Luca Susmel and David Taylor, The Theory of Critical Distances as an alternative experimental strategy for the determination of KIc and ΔKth, Engineering Fracture Mechanics, 77, (9), 2010, p1492-1501
Taylor, D. , An impact factor for JMBBM, 2010, - 479
David Taylor, Applications of the Theory of Critical Distances in Failure Analysis, Engineering Failure Analysis, 18, (2), 2010, p543-549
Susmel L and Taylor D, On the use of the theory of critical distances to estimate KIC and "Kth from experimental results generate by testing standard notches, Key Engineering Materials, 417-418, 2010, p25 - 28
David Taylor, Lauren Mulcahy, Gerardo Presbitero, Pietro Tisbo, Clodagh Dooley, Garry Duffy and Thomas Clive Lee, The Scissors Model of Microcrack Detection in Bone: Work in Progress, Materials Research Society Proceedings, 1274, 2010
Taylor, D., What do you do with your data?, 2010, - 291
Taylor, D., On Reviews and Reviewers, 2010, - 229
Taylor, D., Together and Apart: Collegiality and Individuality in Research Centres, Journal of the Mechanical Behavior of Biomedical Materials, 3, (2), 2010, p135
Taylor D, Some of nature's little tricks, Materials Today, 13, 2010, p6 - 7
Edwards, WB, Taylor D, Rudolphi TJ, Gillette JC and Derrick TR , Effects of running speed on a probabilistic stress fracture model. , Clinical Biomechanics, 25, 2010, p372 - 377
Susmel L and Taylor D, An elastoplastic reformulation of the Theory of Critical Distances to estimate lifetime of notched components failing in the low/medium cycle fatigue regime, Journal of Engineering Materials and Technology (Trans ASME), 132, 2010, p0210021 - 0210028
Taylor, D. , A most excellent conference, 2010, - 415
Kennedy, O.D., Brennan, O., Rackard, S.M., Staines, A., O'Brien, F.J., Taylor, D., Lee, T.C., Effects of ovariectomy on bone turnover, porosity, and biomechanical properties in ovine compact bone 12 months postsurgery, Journal of Orthopaedic Research, 27, (3), 2009, p303-309
Kennedy, OD, Brennan, O, Rackard, SM, O'Brien, FJ, Taylor, D, Lee, TC, Variation of trabecular microarchitectural parameters in cranial, caudal and mid-vertebral regions of the ovine L3 vertebra., Journal of Anatomy, 214, (5), 2009, p729 - 735
Oyen, M., Taylor, D., Special issue on nanoindentation of biological materials, Journal of the Mechanical Behavior of Biomedical Materials, 2, (4), 2009, p311
Taylor, D., Interdisciplinary research: Easy, or hard?, 2009, - 1-2
Hazenberg JG, Hentunen TA, Heino TJ, Kurata K, Lee TC and Taylor D., Microdamage detection and repair in bone: fracture mechanics, histology, cell biology., Technology and Health Care, 17, 2009, p67 - 75
Taylor, D., ICMOBT: The international conference on the mechanics of biomaterials and tissues, Journal of the Mechanical Behavior of Biomedical Materials, 2, (2), 2009, p129
Carpinteri, A, Cornetti, P, Pugno N, Sapora A and Taylor, D, Generalised fracture toughness for specimens with reentrant corners: experiments vs theoretical predictions. , Structural Engineering and Mechanics, 32, 2009, p609 - 620
Taylor, D., Kasiri, S., A critical distance analysis of the effect ofcrack length on toughness and fatigue in compact bone, Proceedings of the ASME Summer Bioengineering Conference, SBC2008, (PART A), 2009, p241-242
Kennedy OD, Brennan O, Rackard SM, Staines A, O'Brien FJ, Taylor D, Lee, TC, Effects of Ovariectomy on Bone Turnover, Porosity and Biomechanical Properties in Ovine Compact Bone 12-Months Post-Surgery, Journal of Orthopaedic Research, 27, 2009, p303 - 309
C. Santus, D. Taylor, Physically short crack propagation in metals during high cycle fatigue, International Journal of Fatigue, 2009
Taylor D, Kasiri S and Brazel E, The theory of critical distances applied to problems in fracture and fatigue of bone, Frattura ed Integrita Strutturale, 10, 2009, p12 - 20
Hoey D and Taylor D, Statistical distribution of the fatigue strength of porous bone cement. , Biomaterials, 30, 2009, p6309 - 6317
Brazel E and Taylor D, Predicting the structural integrity of bone defects repaired using bone graft materials. , Computer methods in biomechanics and biomedical engineering , 12, 2009, p297 - 304
Carpinteri, A., Cornetti, P., Pugno, N., Sapora, A., Taylor, D., Generalized fracture toughness for specimens with re-entrant corners: Experiments vs. theoretical predictions, Structural Engineering and Mechanics, 32, (5), 2009, p609-620
Hoey D and Taylor D, Comparison of the fatigue behaviour of two different forms of PMMA, Fatigue and Fracture of Engineering Materials and Structures, 32, 2009, p261 - 269
Hoey D and Taylor D, Quantitative analysis of the effect of porosity on the fatigue strength of bone cement., Acta Biomaterialia, 5, 2009, p719 - 726
Edwards WB, Taylor D, Rudolphi TJ, Gillette JC and Derrick TR , Effects of stride length and running mileage on a probabilistic stress fracture model, Medicine and Science in Sports and Exercise, 41, 2009, p2177 - 2184
Taylor D and Hoey D, High cycle fatigue of welded joints: the TCD experience, International Journal of Fatigue, 31, 2009, p20 - 27
Santus C and Taylor D, Physically short crack propagation in metals during high cycle fatigue, International Journal of Fatigue, 31, 2009, p1356 - 1365
, The role of stress concentrations in the bone cement mantle, edited by df , (PART A), 2009, pp463-464
Lee, T.C., Taylor, D., Lies, damned lies and case studies, Journal of the Mechanical Behavior of Biomedical Materials, 2, (5), 2009, p409
Taylor D, ) On the application of the Theory of Critical Distances for the prediction of fracture in fibre composites, Frattura et Integrita Strutturale, 11, 2009, p3 - 9
Taylor D, Bone as a structural material: how good is it? , Studies in Health Technology and Informatics , 133, 2008, p221 - 229
Taylor D, Microstructural parameters in the theory of critical distances, Materials Science Forum , 567, 2008, p23 - 28
Carpinteri A, Cornetti, P, Pugno N, Sapora A, Taylor D , A finite fracture mechanics approach to structures with sharp V notches, Engineering Fracture Mechanics, 75, 2008, p1736 - 1752
Taylor D, The Theory of Critical Distances, Engineering Fracture Mechanics , 75, 2008, p1696 - 1705
Hoey D and Taylor D , Fatigue in porous PMMA: the effect of stress concentrations, International Journal of Fatigue, 30, 2008, p989 - 995
Susmel L and Taylor D , ) The modified wohler curve method applied along with the theory of critical distances to estimate finite life of notched components subjected to complex multiaxial loading paths, Fatigue and Fracture of Engineering Materials and Structures , 31, 2008, p1047 - 1064
Susmel L and Taylor D , The theory of critical distances to predict static strength of notched brittle components subjected to mixed mode loading, Engineering Fracture Mechanics, 75, 2008, p534 - 550
Taylor D, Theoretical Modelling in Bioengineering, Irish Journal of Medical Science, 177, 2008, p1 - 18
Araujo JA, Susmel L, Taylor D, Ferro JCT, Ferriera, J.L.A, On the prediction of high cycle fretting fatigue strength : Theory of Critical Distances versus hot spot approach, Engineering Fracture Mechanics, 75, 2008, p1763 - 1778
Taylor D and Kasiri S, A comparison of critical distance methods for fracture prediction, International Journal of Mechanical Sciences, 50, 2008, p1075 - 1081
(ed.), Fatigue in PMMA: The effect of notches and pores predicted using the TCD, 2, 2008, 1570-1575 p
Dendorfer S, Maier HJ, Taylor D and Hammer J, Anisotropy of the fatigue behaviour of cancellous bone, Journal of Biomechanics, 41, 2008, p636 - 641
Kennedy O, Brennan O, Mauer P, O'Brien FJ, Rackard SM, Taylor D and Lee TC, The behaviour of fatigue induced microdamage in compact bone samples from control and ovariectomised sheep. , Studies in Health Technology and Informatics , 133, 2008, p148 - 155
Kasiri S and Taylor D , A critical distance study of stress concentrations in bone, Journal of Biomechanics, 41, 2008, p603 - 609
Susmel L and Taylor D, On the use of the Theory of Critical Distances to predict static failures in ductile metallic materials containing different geometrical features, Engineering Fracture Mechanics, 75, 2008, p4410 - 4421
Kennedy OD, Brennan O, Rackard SM, Mauer P, O'Brien FJ, Taylor D, Lee, TC , The effects of increased intracortical remodeling on microcrack behaviour in compact bone, Bone, 43, 2008, p889 - 893
Susmel S, Taylor D and Tovo R , On the estimation of notch fatigue limits by using the theory of the critical distances: L, ao and open notches, Structural Durability and Health Monitoring , 4, 2008, p1 - 18
Kennedy OD, Brennan O, Rackard SM, Mahony NJ, O'Brien FJ, Taylor D, Lee, TC , Effects of High bone Turnover on the Biomechanical Properties of the L3 Vertebra in a Model of Early Stage Osteoporosis, Spine, 33, 2008, p2518 - 2523
Taylor D, Hazenberg JG and Lee TC , Living with cracks: damage and repair in human bone, Nature Materials, 6, 2007, p263 - 268
Taylor D, Fracture and repair of bone: a multiscale problem, Journal of Materials Science , 42, 2007, p8911 - 8918
Reilly G, Muir G, Kasiri S and Taylor D, The effect of indenter geometry on indentation force and microdamage in compact bone, Bioengineering in Ireland 13, Enniskillen, Northern Ireland, January 2007, edited by Orr J , RAMI, 2007, pp91-
Taylor D, Hazenberg J, O'Brien FJ and Lee TC , How does bone detect cracks? , Key Engineering Materials, 348, 2007, p57 - 60
Kasiri S, Reilly G, Taylor D , Simulation of bone indentation , WIT Transactions on Biomedicine and Health, 12, 2007, p113 - 121
Taylor, D.; Hazenberg, J.; O'Brien, F.J. and Lee, T.C. , How does bone detect cracks?, Key Engineering Materials, 348-349, 2007, p57 - 60
Susmel L and Taylor D, The theory of critical distances and the estimation of notch fatigue limits: L, ao and open notche, ICCES 07, Miami, USA, January 2007, 2007, pp797 - 802
Kasiri S and Taylor D, Bone indentation: a critical distance approach, Bioengineering in Ireland 13, Enniskillen, Northern Ireland, January 2007, edited by Orr J , RAMI, 2007, pp7-
Taylor D, The Theory of Critical Distances: A New Perspective in Fracture Mechanics, Oxford, UK, Elsevier, 2007, 1 - 284pp
O'Brien, F.J.; Taylor, D. and Lee, T.C. , Bone as a composite material: the role of osteons as barriers to crack growth in compact bone, International Journal of Fatigue, 29, 2007, p1051 - 1056
Taylor D, Hoey D and Sanz L, Fracture and fatigue of bone and bone cement, European Conference on Fracture 16, Alexandroupolis, Greece, July 2007, 2007, pp1342 - 1352
Bellett D, Taylor D and Moret F , A stress distribution remodelling technique , International Journal of Fracture, 143, 2007, p177 - 188
Taylor D, ) Predicting fatigue in welded joints: new theories and some practical experience, Key Engineering Materials, 348, 2007, p557 - 560
Kennedy O, Brennan O, Mauer P, Rackard S, O'Brien FJ, Taylor D and Lee TC , Fatigue induced microdamage in compact bone samples from control and ovariectomised sheep, Transactions of the Orthopaedic Research Society, San Diego, USA, January 2007, ORS, 2007, pp315-
O'Brien FJ, Taylor D and Lee TC , Bone as a composite material: the role of osteons as barriers to crack growth in compact bone, International Journal of Fatigue, 29, 2007, p1051 - 1056
Taylor D, The theory of critical distances, European Conference on Fracture 16, Alexandroupolis, Greece, July 2007, 2007, pp236 - 246
Crupi V, Guglielmino E, Risitano A and Taylor D, Different methods for fatigue assessment of T-welded joints used in ship structures, Journal of Ship Research, 51, 2007, p150 - 159
Susmel L and Taylor D , Non-propagating cracks and high-cycle fatigue failure in sharply notched specimens under in-phase mode I and II loading, Engineering Failure Analysis , 14, 2007, p861 - 876
Taylor D, Bone as a Structural Material: How Good is it?, Applied Biomechanics, Regensburg, Germany, June 2007, edited by J.Hammer , 2007, pp58 - 68
Hazenberg JG, Taylor D and Lee TC , The role of osteocytes and bone microstructure in preventing osteoporotic fractures, Osteoporosis International , 18, 2007, p1 - 8
Susmel L and Taylor , A novel formulation of the theory of critical distances to estimate lifetime of notched components in the medium-cycle fatigue regime, Fatigue and Fracture of Engineering Materials and Structures, 30, 2007, p567 - 581
Taylor, D., Kruzic, J.J., Ritchie, R.O., Papers from the International Conference on the Mechanics of Biomaterials and Tissues, International Journal of Fatigue, 29, (6), 2007, p991
Araújo JA , Susmel L, Taylor D, Ferro JCT and Mamiya EN , On the use of the theory of critical distances and the modified Wöhler Curve Method to estimate fretting fatigue strength of cylindrical contacts., International Journal of Fatigue, 29, 2007, p95 - 107
Taylor D, The fracture mechanics of bone, 23rd Conference of GEF (Spanish Fracture Group), Albarracin, Spain, March 2006, 2006, pp1 - 12
Susmel L and Taylor D, On the use of the conventional high-cycle multiaxial fatigue criteria reinterpreted in terms of the Theory of Critical Distances, Fatigue 2006, Atlanta, USA, May 2006, edited by Johnson WS , Elsevier, 2006, pp1286 - 1296
Hazenberg JG, Freeley M, Foran E, Lee TC and Taylor D, Microdamage: a cell transducing mechanism based on ruptured osteocyte processes, Journal of Biomechanics, 39, 2006, p2096 - 2103
Hazenberg JG, Taylor D and Lee TC, Mechanisms of short crack growth at constant stress in bone, Biomaterials, 27, 2006, p2114 - 2122
Taylor D, The theory of critical distances: a history and a new definition, Structural Durability and Health Monitoring, 2, 2006, p1 - 10
Taylor D, Hazenberg JG and Lee TC , The cellular transducer in bone: what is it? , Technology and Health Care , 14, 2006, p367 - 377
Hazenberg JG, Matthews E, Lee TC and Taylor D, The effect of mini-plate configuration and location in mandibular fractures, Bioengineering in Ireland 12, Galway, January 2006, edited by P.McHugh , Royal Academy of Medicine in Ireland, 2006, pp135-
Taylor D, The role of defects in the fatigue strength of bone cement, Fatigue 2006, Atlanta, USA, May 2006, edited by Johnson WS , Elsevier, 2006, pp446 - 456
Hazenberg JG, Taylor D and Lee , Dynamic short crack growth in bone, Technology and Health Care , 14, 2006, p393 - 402
Pessot F, Susmel L and Taylor D, The theory of critical distances to predict static failures in notched brittle components subjected to multiaxial loading, Crack Paths, Parma, Italy, September 2006, edited by Carpinteri, A and Pook LS , University of Parma, 2006, pp299 - 309
Taylor D, Size effects in notched components, Fatigue 2006, Atlanta, USA, May 2006, edited by Johnson WS , Elsevier, 2006, pp547 - 557
Lee, T.C., O'Brien, F.J., Gunnlaugsson, T., Parkesh, R., Taylor, D., Microdamage and bone mechanobiology , Technology and Health Care, 14, (4-5), 2006, p359-365
Cornetti P, Pugno N, Carpinteri A and Taylor D , A coupled stress and energy failure criterion, Engineering Fracture Mechanics , 73, 2006, p2021 - 2033
Susmel L and Taylor D, A simplified approach to apply the theory of critical distances to notched components under torsional fatigue loading, International Journal of Fatigue, 28, 2006, p417 - 430
Lee, T.C.; O'Brien, F.J.; Gunnlaugsson, T.; Parkesh, R. and Taylor, D. , Microdamage and bone mechanobiology, Technology and Healthcare , 14, (4-5), 2006, p359 - 365
Taylor D, Telling stories about bone: Haughton Lecture 2006, Bioengineering in Ireland 12, Galway, January 2006, edited by P.McHugh , Royal Aademy of Medicine in Ireland, 2006, pp63 - 66
Susmel L and Taylor D , Can the conventional multiaxial high-cycle fatigue criteria be reinterpreted in terms of the theory of critical distances? , Structural Durability and Health Monitoring, 2, 2006, p91 - 108
TC, O'Brien FJ, Gunnlaugsson T, Parkesh R and Taylor D, Microdamage and bone mechanobiology, Technology and Health Care , 14, 2006, p359 - 365
Taylor D, The theory of critical distances applied to the prediction of brittle fracture in metallic materials , Structural Integrity and Durability, 1, 2006, p145 - 154
Fatigue in, editor(s)Kaufmann T , Geriatric Rehabilitation Manual, USA, Elsevier Ltd, 2006, pp131 - 134, [Stokes EK, O'Connell C]
Susmel L and Taylor D, On the use of the theory of critical distances to estimate fatigue strength of notched components in the medium-cycle fatigue regime, Fatigue 2006, Atlanta, USA, May 2006, edited by Johnson WS , Elsevier, 2006, pp1045 - 1055
Bellett D and Taylor D, The effect of crack shape on the fatigue limit of three-dimensional stress concentrations, International Journal of Fatigue, 28, 2006, p114 - 123
Hazenberg JG, Lee TC and Taylor D, The role of osteocytes in functional boen adaptation, BoneKey-Osteovision , 3, 2006, p10 - 16
Wiersma S, Dolan F and Taylor D, Fatigue and fracture in materials used for micro-scale biomedical components, Biomedical materials and engineering, 16, 2006, p137 - 146
Kennedy OD, Brennan O, Rackard SM, O'Brien FJ, Taylor D and Lee TC, The effect of osteoporosis on compact bone, Bioengineering in Ireland 12, Galway, January 2006, edited by P.McHugh , Royal Academy of Medicine in Ireland, 2006, pp26-
Mauer P, Kennedy OD, Brennan O, Rackard SM, Taylor D, O'Brien FJ and Lee TC, Manufacturing mm-scale ovine cortical bone specimens for mechanical testing, Bioengineering in Ireland 12, Galway, January 2006, Royal Academy of Medicine in Ireland, 2006, pp85-
Susmel L and Taylor D, The theory of critical distances to predict fatigue lifetime of notched components, Advances in Fracture and Damage Mechanics IV, Majorca, June 2005, edited by M.H.Aliabadi , 2005, pp411 - 416
Crupi G, Crupi V, Guglielmino E and Taylor D, Fatigue assessment of welded joints using critical distance and other methods, Engineering Failure Analysis, 12, 2005, p129 - 142
O'Brien, F.J.; Taylor, D and Lee, T.C., The effect of bone microstructure on the initiation and growth of microcracks. , Journal of Orthopedic Research, 23, (2), 2005, p475 - 480
Taylor D, Predicting fracture in bone and biomaterials, Bioengineering In Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp2 - 2
Taylor D, Cornetti P and Pugno N, The fracture mechanics of finite crack extension, Engineering Fracture Mechanics, 72, 2005, p1021 - 1038
Mahony NJ, Donne B, O'Brien M, Taylor D and Lee TD, Reliability, measurement error and normal database for DEXA assessment of bone density at five sites in the ovine skeleton, Bioengineering In Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp60 - 60
O'Brien FJ, Hardiman D, Hazenberg JG, Mercy M, Taylor D and Lee TC, The behaviour of microcracks in compact bone, European Journal of Morphology, 42, 2005, p71 - 79
Reilly G and Taylor D, Cutting bone: flourescent labelling of the damage zone in bovine cortical bone, Bioengineering In Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp21 - 21
Taylor D, Theoretical modelling of damage, repair and adaptation in bone, Proceedings of the First International Conference on the Mechanics of Biomaterials and Tissues, Hawaii, USA, December 2005, Elsevier, 2005, ppK10-
Taylor D, Analysis of fatigue failures in components using the theory of critical distances, Engineering Failure Analysis, 12, 2005, p906 - 914
O'Brien FJ, Taylor D and Lee TC, The effect of bone microstructure on the initiation and growth of microcracks, Journal of Orthopaedic Research, 23, 2005, p475 - 480
Hazenberg JG, Taylor D and Lee TC, The effects of bone histomorphometry on microcrack growth and damage to cellular processe, Bioengineering in Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp18 - 18
Mercy MV, O'Brien FJ, Lee TC and Taylor D, Failure mechanisms in bone - a mechanical and histological study, Bioengineering In Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp20 - 20
Lee TC and Taylor D, Quantification of ovien bone adaptation to altered load: morphometry, density and surface strain, European Journal of Morphology, 41, 2005, p117 - 125
Cornetti P, Pugno N and Taylor D, Strength predictions via finite fracture mechanics, Proceedings of the 11th International Conference on Fracture, Turin, Italy, March 2005, edited by A.Carpinteri , 2005, pp73 - 83
Kasiri S, Reilly G and Taylor D, Cutting bone: numerical simulations of the failure process, Bioengineering In Ireland 11, Dublin , 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp55 - 55
Kennedy OD, Brennan O, O'Brien FJ, Taylor D, Rackard SM and Lee TC, The contribution of bone turnover to reduced bone quality in osteoporosis, Bioengineering In Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp22 - 22
O'Brien F, Taylor D and Lee TC, The role of osteons as microstructural barriers in compact bone, First Internationa lConference on the Mechanics of Biomaterials and Tissues, December 2005, Elsevier, 2005, ppO134-
Wiersma S and Taylor D, Fatigue of materials used in microscopic components, Fatigue and Fracture of Engineering Materials and Structures, 28, 2005, p1153 - 1160
O'Brien, F.J.; Hardiman, D.A.; Hazenberg, J.; Mercy, M.V.; Mohsin, S.; Taylor, D. and Lee, T.C., The behaviour of microcracks in compact bone, European Journal of Morphology, 42, (1-2), 2005, p71 - 79
Dodds M, Taylor D, O'Reilly SP and McCormack D, Stabilisation of the dysplastic paediatric hip. A novel approach using a bioresorbable suture anchor, Bioengineering In Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp74 - 74
Kennedy, O.D. , Brennan, O. , O'Brien, F.J. , Rackard, S.M. , Taylor, D. , Lee, T.C., The contribution of intracortical bone turnover to bone quality in osteoporosis, Proceedings of the 2005 Summer Bioengineering Conference , 2005 Summer Bioengineering Conference , 2005, 2005, pp1506-1507
Taylor D, Finite fracture mechanics and the theory of critical distances, Advanced in Fracture and Damage Mechanics IV, Majorca, Spain, July 2005, edited by M.Aliabadi , 2005, pp565 - 570
Reilly GA and Taylor D, An analysis of the fracture process and microdamage occurring during cutting of cortical bone, International Conference on the Mechanics of Biomaterials and Tissues, Hawaii, December 2005, edited by Ritchie RO, Taylor D and Teoh SH , 2005, pp268 - 268
Bellett D, Taylor D, Marco S, Guillois J and Pircher T, The fatigue behaviour of three-dimensional stress concentrators, International Journal of Fatigue, 27, 2005, p207 - 221
Taylor D, Notch size effects in multiaxial fatigue, Progettazione a fatica in presenza di multiassialita tensionali, Ferrara, Italy, edited by L.Susmel , IGF, 2005, pp3 - 14
Taylor D., Predicting the fracture strength of ceramic materials using the theory of critical distances, Engng Fract Mech, 71, 2004, p2407 - 2416
Taylor D, Casolari E and Bignardi C, Predicting stress fractures using a probabilistic model of damage, repair and adaptation, Journal of Orthopaedic Research, 22, 2004, p487 - 494
Susmel L and Taylor D, La teoria delle distanze critiche per la stima del limite di fatica a torsione di componenti intagliati., "Innovazione nella Progettazione Industriale", Convegno Nazionale XIV ADM - XXXIII AIAS, Bari, Italy, Sept 2004, 2004
Wiersma S and Taylor D, A critical distance approach applied to microscopic biomedical specimens under fatigue loading., ECF11 Conference, Stockholm, August 2004, 2004, pp768 - 778
Susmel L and Taylor D, Non-propagating cracks under in-phase Mode I and II loadings., ECF11 Conference, Stockholm, August 2004, 2004
Lee TC, O_Brien FJ, Mohsin S, Hazenberg JG, Taylor D., Microstructure and microdamage in bone, Micro- and Nanostructures of Biological Systems, Halle, edited by A Blume, H-J Hein & G Bischoff & H-J Hein , 3, Martin Luther University Halle-Wittenberg, 2004, pp9 - 12
Taylor D, Merlo M, Pegley R and Cavatorta M.P., The effect of stress concentrations on the fracture strength of polymethylmethacrylate, Materials Science and Engineering A, 382, 2004, p288 - 294
Taylor D, Tilmans, S, Stress intensity variations in bone microcracks during the repair process, J.Theor Biol , 229, 2004, p169 - 177
Crupi G and Taylor D, Residual stresses and fatigue prediction using the theory of critical distances., ECF11 Conference, Stockholm, August 2004, 2004, pp566 - 576
Taylor D., Analysis of fatigue failure in components using the theory of critical distances., ICEFA-1 conference, Lisbon, July 2004, 2004, pp22 - 22
Reilly GA, McCormack BAO and Taylor D, Cutting sharpness measurement: a critical review, Journal of Materials Processing Technology, 153, 2004, p261 - 276
Lee TC and Taylor D, Quantification of ovine bone adaptation to altered load: morphometry, density and surface strain, Europ.J.Morphology, 2004
Taylor, D., Applications of the theory of critical distances to the prediction of brittle fracture in metals and non-metals., ECF11 Conference, Stockholm, August 2004, 2004, pp324 - 334
Crupi V and Taylor D, Fatigue assessment of welded joints using, Engng Failure Anal, 2004
L. Susmel, D. Taylor, R. Tovo, Crack Paths in Sharply Notched Specimens under In-Phase Biaxial Loadings, FCP 2003, Parma, Italy, September 2003, 2003
Taylor D, O'Reilly P, Vallet L and Lee TC, The fatigue strength of compact bone in torsion, J.Biomechanics, 36, 2003, p1103 - 1109
Taylor D, How does bone break?, Nature Materials, 2, 2003, p133 - 134
Taylor D and Lee TC, Microdamage and mechanical behaviour: predicting failure and remodeling in compact bone, Journal of Anatomy, 203, 2003, p203 - 211
Mohsin S, Taylor D and Lee TC, Three-dimensional reconstruction of Haversian systems in ovine compact bone, European Journal of Morphology, 40, 2003, p309 - 316
O'Brien FJ, Taylor D and Lee TC., Microcrack accumulation at different intervals during fatigue testing of compact bone, J.Biomech., 36/7, 2003, p973 - 980
Taylor D and Lee TC, A crack growth model for the simulation of fatigue in bone, Int.J.Fatigue, 25, 2003, p387 - 396
V. Crupi, E. Guglielmino, A. Risitano, D. Taylor, "New approaches to assess the fatigue life of welded aluminium ship details", NAV 2003, International Conference on ship and shipping research, Palermo, 24-27 June 2003, 2003
Susmel L., Taylor D., Fatigue Design in the Presence of Stress Concentrations, Int. J. of Strain Analysis, 38, (5), 2003, p443 - 452
JG Hazenberg, FJ O'Brien, D.Taylor and TC Lee, Microcrack growth and shape development in cortical bone, Compuer Methods in Biomechanics and Biomedical Engineering, Rome, November 2001, edited by Middleton and Jones , 4, 2003
Lee, T.C.; Mohsin, S.; Taylor, D.; Parkesh, R.; Gunnlaugsson, T.; O'Brien, F.J.; Giehl, M. and Gowin, W. , Detecting microdamage in bone , Journal of Anatomy, 203, (2), 2003, p161 - 172
D.Taylor, F.O'Brien and TC Lee, Damage accumulation in bone: theory and practice, Compuer Methods in Biomechanics and Biomedical Engineering, Rome, November 2001, edited by Middleton and Jones , 4, 2003
Taylor D, Hazenberg J.G. and Lee TC, The Cellular Transducer in Damage-Stimulated Bone Remodelling: A Theoretical Investigation Using Fracture Mechanics, Journal of Theoretical Biology, 225, 2003, p65 - 75
Lee TC, Mohsin S, Taylor D, Parkesh R, Gunnlaugsson T, O'Brien FJ, Giehl M and Gowin W, Detecting microdamage in bone, J.Anatomy, 203, 2003, p161 - 172
Taylor, D, Comment on "Notch Size Effects in the Fatigue Limit of Steel" by M.Makkonen., 2003, -
Susmel L., Taylor D, Two methods for predicting the multiaxial fatigue limits of sharp notches, Fatigue Fract. Engng. Mater. Struct., 26, 2003, p821 - 833
Stokes EK, Fitzharris L, Fatigue & age, Proceedings of the 14th Congress of the World Confederation for Physical Therapy, 14th Congress of the World Confederation for Physical Therapy, Barcelona, 2003, 2003, ppRR-PL-1955
O'Brien, F.J.; Lee, T.C. and Taylor, D , Microcrack accumulation at different intervals during fatigue testing of compact bone., Journal of Biomechanics , 36, (7), 2003, p973 - 980
Taylor D, Fatigue: Some novel applications of fracture mechanics concepts to the problem of stress concentrations, Associazione Italiana per l'Analisi delle Sollecitazioni (AIAS) XXXI Convegno Nazionale, Parma,Italy, AIAS, 2002, pp20 - 32
TAYLOR, D, MODELLING OF FATIGUE CRACK GROWTH AT THE MICROSTRUCTURAL LEVEL, COMPUTATIONAL MATERIALS SCIENCE, 25, 2002, p228 - 236
TAYLOR, D, OBRIEN, F, LEE, TC, A THEORETICAL MODEL FOR THE SIMULATION OF MICRODAMAGE ACCUMULATION AND REPAIR IN COMPACT BONE, MECCANICA, 37, 2002, p397 - 406
OBRIEN, FJ, TAYLOR, D, LEE, TC, AN IMPROVED LABELLING TECHNIQUE FOR MONITORING MICROCRACK GROWTH IN COMPACT BONE, JOURNAL OF BIOMECHANICS, 35, 2002, p523 - 526
G.Crupi, V.Crupi, E.Guglielmino and D.Taylor, Comportamento a fatica di giunti saldati in lega di alluminio., IGF2002, 2002
MOHOLKAR, K, TAYLOR, D, OREAGAN, M, FENELON, G, A BIOMECHANICAL ANALYSIS OF FOUR DIFFERENT METHODS OF HARVESTING BONE-PATELLAR TENDON-BONE GRAFT IN PORCINE KNEES, JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME, 84A, 2002, p1782 - 1787
Susmel L and Taylor D., The point method and the modified Wohler curve criterion for the multiaxial fatigue assessment of notched components, FATIGUE 2002: Proceedings of the Eight International Fatigue Congress, Birmingham UK, EMAS, 2002, pp1889 - 1896
Lee TC, Staines A and Taylor D, Bone adaptation to load: microdamage as a stimulus for bone remodelling, J Anat 201, 2002, p437 - 446
Brien, F.J.; Taylor, D.; Brennan, O. and Lee, T.C., "The effect of bone microstructure on the initiation and growth of microcracks", 48th Annual Meeting of the Orthopaedic Research Society, Dallas, Texas, February, 2002, 2002, pp324 - 324
PRENDERGAST, PJ, MURPHY, BP, TAYLOR, D, DISCARDING SPECIMENS FOR FATIGUE TESTING OF ORTHOPAEDIC BONE CEMENT: A COMMENT ON CRISTOFOLINI ET AL. (2000) - FATIGUE FRACT. ENGNG. MATER. STRUCT. 23, 953-957, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 25, 2002, 315 - 316
Bellett D and Taylor D., The effect of crack shape on the fatigue assessment of three-dimensional stress concentrations, FATIGUE 2002: Proceedings of the Eight International Fatigue Congress, Birmingham UK, EMAS, 2002, pp2767 - 2774
O'Brien, F.J.; Lee, T.C. and Taylor, D, An improved labelling technique for monitoring microcracks growth in compact bone., Journal of Biomechanics, 35, 2002, p523 - 526
Prendergast PJ, Murphy BP and Taylor D., Discarding specimens for fatigue testing of orthopaedic bone cement: a comment on Cristofolini et al... , Fatigue Fract Engng Mater Struct, 25, 2002, p315 - 316
O'Brien FJ, Taylor D and Lee TC., An improved labelling technique for monitoring microcrack growth in compact bone, 35, 2002, p523 - 526
Taylor D, O'Brien F, Lee TC , A theoretical model for the simulation of microdamage accumulation and repair in compact bone., Meccanica, 37, (4-5), 2002, p397 - 406
Chaves-Repiso V and Taylor D., Use of 'simplified models' in fatigue prediction of real components, FATIGUE 2002: Proceedings of the Eight International Fatigue Congress, Birmingham UK, EMAS, 2002, pp2799 - 2806
TAYLOR, D, BARRETT, N, LUCANO, G, SOME NEW METHODS FOR PREDICTING FATIGUE IN WELDED JOINTS, INTERNATIONAL JOURNAL OF FATIGUE, 24, 2002, p509 - 518
Crupi G, Crupi V, Guglielmino E and Taylor D, Fatigue assessment of welded joints by different approaches, FATIGUE 2002: Proceedings of the Eight International Fatigue Congress, Birmingham UK, EMAS, 2002, pp363 - 370
S Mohsin, M Mercy, F.J.O'Brien, D Taylor and TC Lee, Computerised 3D reconstruction of Haversian systems during bone remodelling, Compuer Methods in Biomechanics and Biomedical Engineering, Rome, November 2001, edited by Middleton and Jones , 4, 2001
TAYLOR, D, A MECHANISTIC APPROACH TO CRITICAL-DISTANCE METHODS IN NOTCH FATIGUE, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 24, 2001, p215 - 224
O'Brien FJ, Taylor D, Lee TC., The process of microcrack growth in compact bone, Orthopaedic Research Society, Transactions of the 4th Combined Meeting of the Orthopaedic Research Societies of the USA, Europe, Canada and Japan, Chicago, edited by I Hvid, PS Nedza , 2001, pp150 - 150
Taylor, D., Fatigue of Biological Structures and Biomaterials, Encyclopedia of Materials: Science and Technology, 2001
O'Brien F, Taylor D, Dickson G, Lee C., Visualization of three dimensional microcracks in human bone, Orthopaedic Research Society, Transactions of the 4th Combined Meeting of the Orthopaedic Research Societies of the USA, Europe, Canada and Japan, Chicago, edited by I Hvid, PS Nedza , 2001, pp217 - 217
D.Taylor and G.Wang, The Critical Volume Method in Fatigue Analysis, NATO Science Series II, "Notch Effects in Fatigue and Fracture", edited by Guy Pluvinage and Marenglen Gjonaj , 11, Kluwer (Dordrecht, The Netherlands), 2001, pp187 - 205
O'Brien FJ, Taylor D, Lee, TC, The process of microcrack growth in compact bone, American Society of Mechanical Engineers, Proceedings of the 2001 Bioengineering Conference (ISBN 0-791-1668-0), New York, edited by Kamm RD, Schmid-Schonbein GW, Ateshian GA, Hefzy MS , 40, BED, 2001, pp791 - 792
Taylor D, Falsetti F, O'Brien F, O'Reilly P, Banville E, Lee TC., A fatigue-based model of disuse osteoporosis, Computer Methods in Biomechanics and Biomedical Engineering, 4, 2001, p413 - 420
O'Brien FJ, Taylor D and Lee TC, Microcrack accumulation during fatigue testing of compact bone, Technology and Health Care, 9, 2001, p118 - 119
Taylor D, Falsetti F, O'Brien FJ, O'Reilly P, Banville E, Lee TC , A fatigue based model of disuse osteoporosis, Computer Methods in Biomechanics and Biomedical Engineering, 4, 2001, p413-420
TAYLOR, D, KUIPER, JH, THE PREDICTION OF STRESS FRACTURES USING A 'STRESSED VOLUME' CONCEPT, JOURNAL OF ORTHOPAEDIC RESEARCH, 19, 2001, p919 - 926
Fatigue in Biological Structures and Biomaterials in, editor(s)KHJ Buschow, RW Cahn, MC Flemings et al. , Encyclopedia of Materials: Science and Technology, Elsevier, 2001, pp2951 - 2955, [Taylor D.]
ZHANG, Y, TAYLOR, D, OPTIMIZATION OF SPOT-WELDED STRUCTURES, FINITE ELEMENTS IN ANALYSIS AND DESIGN, 37, 2001, p1013 - 1022
LEE, TC, OBRIEN, FJ, TAYLOR, D, THE NATURE OF FATIGUE DAMAGE IN BONE, INTERNATIONAL JOURNAL OF FATIGUE, 22, 2000, p847 - 853
O'Brien FJ, Taylor D, Dickson GR, Lee TC , Visualisation of three-dimensional microcracks in compact bone. , JOURNAL OF ANATOMY, 197, (3), 2000, p413 - 420
TAYLOR, D, SCALING EFFECTS IN THE FATIGUE STRENGTH OF BONES FROM DIFFERENT ANIMALS, JOURNAL OF THEORETICAL BIOLOGY, 206, 2000, p299 - 306
OBRIEN, FJ, TAYLOR, D, DICKSON, GR, LEE, TC, VISUALISATION OF THREE-DIMENSIONAL MICROCRACKS IN COMPACT BONE, JOURNAL OF ANATOMY, 197, 2000, p413 - 420
TAYLOR, D, BOLOGNA, P, KNANI, KB, PREDICTION OF FATIGUE FAILURE LOCATION ON A COMPONENT USING A CRITICAL DISTANCE METHOD, INTERNATIONAL JOURNAL OF FATIGUE, 22, 2000, p735 - 742
TAYLOR, D, WANG, G, THE VALIDATION OF SOME METHODS OF NOTCH FATIGUE ANALYSIS, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 23, 2000, p387 - 394
ZHANG, Y, TAYLOR, D, SHEET THICKNESS EFFECT OF SPOT WELDS BASED ON CRACK PROPAGATION, ENGINEERING FRACTURE MECHANICS, 67, 2000, p55 - 63
TAYLOR, D, SPECIAL ISSUE ON FATIGUE OF BIOMATERIALS, INTERNATIONAL JOURNAL OF FATIGUE, 22, 2000, III - III
WANG, G, TAYLOR, D, BOUQUIN, B, DEVLUKIA, J, CIEPALOWICZ, A, PREDICTION OF FATIGUE FAILURE IN A CAMSHAFT USING THE CRACK MODELLING METHOD, ENGINEERING FAILURE ANALYSIS, 7, 2000, p189 - 197
SYED, AA, KENNEDY, JG, MULLET, H, OFLANAGAN, J, TAYLOR, D, FATIGUE FAILURE OF AN AO SPIRAL BLADE, ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY, 120, 2000, p366 - 368
Lee TC, O'Brien FJ, Taylor D , The nature of fatigue damage in bone. , International Journal of Fatigue, 22, 2000, p847 - 853
TAYLOR, D, GEOMETRICAL EFFECTS IN FATIGUE: A UNIFYING THEORETICAL MODEL, INTERNATIONAL JOURNAL OF FATIGUE, 21, 1999, p413 - 420
Taylor D, Fatigue in bone: predictions of adaptation, Fatigue'99, China, June 1999, 1999, pp1777 - 1782
Taylor D, O'Brien F, Prina-Mello A, Ryan C, O'Reilly P, Lee TC , Compression data on bovine bone confirms that a "stressed volume" principle explains the variability of fatigue strength results. , Journal of Biomechanics, 32, (11), 1999, p1199 - 1203
Simon P. Wilson and D. Taylor, Statistical analysis and prediction with short fatigue crack data using a population model, Fatigue and Fracture of Engineering Materials and Structures, 22, (1), 1999, p67 - 76
Taylor D, "Fatigue damage in bone: links to adaptation", "Synthesis in Bio Solid Mechanics", , IUTAM symp., Kluwer, 1999, pp175 - 186
TAYLOR, D, CARR, AJ, THE CRACK-MODELLING TECHNIQUE: OPTIMIZATION OF PARAMETERS, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 22, 1999, p41 - 50
Zhang Y and Taylor D, Fatigue life prediction of spot-welded components, Fatigue'99, China, June 1999, 1999, pp1275 - 1280
Lee TC and Taylor D., Bone remodelling: should we cry Wolff?, Irish Journal of Medical Science, 168, 1999, p102 - 105
Taylor D and Wang G, A critical distance approach which unifies the prediction of fatigue limits for large and small cracks and notches, Fatigue'99, China, June 1999, 1999, pp579 - 584
TAYLOR, D, ZHOU, W, CIEPALOWICZ, AJ, DEVLUKIA, J, MIXED-MODE FATIGUE FROM STRESS CONCENTRATIONS: AN APPROACH BASED ON EQUIVALENT STRESS INTENSITY, INTERNATIONAL JOURNAL OF FATIGUE, 21, 1999, p173 - 178
Taylor D, "A modified fracture mechanics method for the prediction of fatigue failure from stress concentrations in engineering components", "Fatigue Design and Reliability" ESIS , Fatigue Design, edited by Marquis and Solin , 23, Elsevier, 1999, pp195 - 206
TAYLOR, D, LEE, TC, MEASURING THE SHAPE AND SIZE OF MICROCRACKS IN BONE, JOURNAL OF BIOMECHANICS, 31, 1999, p1177 - 1180
WILSON, SP, TAYLOR, D, STATISTICAL ANALYSIS AND RELIABILITY PREDICTION WITH SHORT FATIGUE CRACK DATA, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 22, 1999, p67 - 76
Lee TC, Noelke L, McMahon GT, Mulville JP and Taylor D, "Functional adaptation in bone", IUTAM symp., Kluwer, 1999, pp1 - 10
Taylor D and Wang G, "Component design: the interface between threshold and endurance limit", ASTM STP 1372 , "Fatigue crack growth thresholds, endurance limits and design", edited by Newman, Piascik , ASTM, 1999, pp361 - 373
GILCHRIST, M, TAYLOR, D, BROBERG, B, UNTITLED, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 22, 1999, 1 - 1
TAYLOR, D, OBRIEN, F, PRINA-MELLO, A, RYAN, C, OREILLY, P, LEE, TC, COMPRESSION DATA ON BOVINE BONE CONFIRMS THAT A "STRESSED VOLUME" PRINCIPLE EXPLAINS THE VARIABILITY OF FATIGUE STRENGTH RESULTS, JOURNAL OF BIOMECHANICS, 32, 1999, p1199 - 1203
Wang G, Taylor D, Ciepalowicz A and Devlukia J, Prediction of fatigue failure in cast aluminium alloy components using the crack modelling method, Fatigue'99, China, June 1999, 1999, pp735 - 740
ODONNELL, MP, HURST, RC, TAYLOR, D, OBSERVATIONS OF THE MICROMECHANISMS AFFECTING THE FRACTURE PATH FOR THERMAL FATIGUE-CREEP LOADING OF A 316L STAINLESS STEEL, MATERIALS AT HIGH TEMPERATURES, 15, 1998, p95 - 98
Taylor D, "Damage and repair in compact bone: some thoughts on the shape of basic mineralisation units", Computer Methods in Biomechanics and Biomedical Engineering, UK, edited by Middleton, Jones and Pande , 2, Gordon and Breach, 1998, pp239 - 246
O'Donnell, M.P., Hurst, R.C. and Taylor, D., Observations of the micromechanisms affecting the fracture path for thermal fatigue-creep loading of a 316L stainless steel, Creep and Fatigue Crack Growth in High Temperature Plant, Saclay, Paris France, 15-17 April 1998, 1998, ppS3 - 23
TAYLOR, D, FATIGUE OF BONE AND BONES: AN ANALYSIS BASED ON STRESSED VOLUME, JOURNAL OF ORTHOPAEDIC RESEARCH, 16, 1998, p163 - 169
TAYLOR, D, MICROCRACK GROWTH PARAMETERS FOR COMPACT BONE DEDUCED FROM STIFFNESS VARIATIONS, JOURNAL OF BIOMECHANICS, 31, 1998, p587 - 592
Looney L, Hurst RC and Taylor D., The effect of high pressure hydrogen on creep fracture of notched ferritic steel components, J.Materials Processing Technology, 77, 1998, p25 - 31
Taylor D, Wang G, Devlukia J, Ciepalowicz A and Zhou W, The analysis of stress concentrations in components: a modified fracture-mechanics approach, "Modern Practice in Stress and Vibration Analysis", Rotterdam, edited by M.Gilchrist, Publ.A.A.Balkema , 1997, pp355 - 358
McNamara BP, Taylor D and Prendergast PJ., Computer prediction of adaptive bone remodelling around noncemented femoral prostheses: the relationship between damage-based and strain-based algorithms, Med.Eng.Phys., 19, 1997, p454 - 463
Sicot, N., Lemarinel, V., Berard, J.Y. and Taylor, D., "Fatigue behaviour of a unidirectional composite laminate in the vicinity of a notch", , ICFC conference, Paris , 1997, pp107 - 117
O'Donnell MP, Hurst, RC and Taylor, D, "Observations of the micromechanisms affecting the fracture path for thermal fatigue-creep loading of a 316L stainless steel", Proc.Nuclear Engineering and Design, 1997, pp23 - 33
TAYLOR, D, BONE MAINTENANCE AND REMODELING: A CONTROL SYSTEM BASED ON FATIGUE DAMAGE, JOURNAL OF ORTHOPAEDIC RESEARCH, 15, 1997, p601 - 606
Taylor, D., Bone maintenance and remodelling: a control system based on fatigue damage, J.Orthop.Res., 15, 1997, p601 - 606
WILSON, SP, TAYLOR, D, RELIABILITY ASSESSMENT FROM FATIGUE MICRO-CRACK DATA, IEEE TRANSACTIONS ON RELIABILITY, 46, 1997, p165 - 172
TAYLOR, D, CRACK MODELLING: A NOVEL TECHNIQUE FOR THE PREDICTION OF FATIGUE FAILURE IN THE PRESENCE OF STRESS CONCENTRATIONS, COMPUTATIONAL MECHANICS, 20, 1997, p176 - 180
Li Jianchun and Taylor D., A new model of short crack closure, ICF9, Pergamon, 1997, pp1443 - 1450
Simon P. Wilson and D. Taylor, Reliability assessment from fatigue micro-crack data, IEEE Transactions on Reliability, 46, (2), 1997, p165 - 172
TAYLOR, D, CIEPALOWICZ, AJ, ROGERS, P, DEVLUKIA, J, PREDICTION OF FATIGUE FAILURE IN A CRANKSHAFT USING THE TECHNIQUE OF CRACK MODELLING, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 20, 1997, p13 - 21
TAYLOR, D, PRENDERGAST, PJ, A MODEL FOR FATIGUE CRACK PROPAGATION AND REMODELLING IN COMPACT BONE, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 211, 1997, p369 - 375
McNamara BP, Cristofolini L, Toni A and Taylor D., Relationship between bone-prosthesis bonding and load transfer in total hip reconstruction, J.Biomechanics, 30, 1997, p621 - 630
McNamara, B.P. and Taylor, D., "Bone adaptation in the ulnar-osteotomised sheep's forelimb predicted using a damage-adaptive remodelling rule", 43rd annual meeting, Orthopaedic Reseach Society (ORS), 1997
Taylor, D., Crack modelling: an aid to optimisation through the analysis of stress concentrators, "Computer Aided Optimum Design of Structures", Southampton, UK, CMP, 1997, pp469 - 478
TAYLOR, D, HUGHES, M, ALLEN, D, NOTCH FATIGUE BEHAVIOUR IN CAST IRONS EXPLAINED USING A FRACTURE MECHANICS APPROACH, INTERNATIONAL JOURNAL OF FATIGUE, 18, 1996, p439 - 445
McNamara, B.P., Toni, A. and Taylor, D., Experimental and Numerical Pre-clinical evaluation relating to total hip arthroplasty, 2nd Int.Conf. on Computer Methods in Biomechanics and Biomedical Engineering, Gordon and Breach (UK), 1996, pp1 - 10
M.P.O'Donnell, R.C.Hurst and D.Taylor , Crack growth behaviour of components subjected to thermal fatigue/creep loading, FATIGUE 96, 1996
M.P.O'Donnell, R.C.Hurst and D.Taylor, "Analysis of crack growth in components under thermal fatigue/creep loading", High Temperature Creep and Fatigue, Inst.Mechanical Engineers London, 1996
McNamara, B.P., Taylor, D. and Toni, A., "Clinical resorption after cementless THA predicted using a damage-adaptive remodelling rule", Proc. 42nd Annual Meeting, Orthopaedic Research Society, Atlanta Georgia, 1996
TAYLOR, D, CRACK MODELLING: A TECHNIQUE FOR THE FATIGUE DESIGN OF COMPONENTS, ENGINEERING FAILURE ANALYSIS, 3, 1996, p129 - 136
TAYLOR, D, LAWLESS, S, PREDICTION OF FATIGUE BEHAVIOUR IN STRESS-CONCENTRATORS OF ARBITRARY GEOMETRY, ENGINEERING FRACTURE MECHANICS, 53, 1996, p929 - 939
Taylor, D., Prendergast, P.J. and McNamara, B.P., Fatigue in human bone: the importance of short-crack behaviour, Fatigue 96, Berlin, May 1996, 1996
Taylor D. and Prendergast, PJ., Damage accumulation in compact bone - a fracture mechanics approach to estimate damage and repair rates, Advances in Bioengineering BED- (Publ.ASME-USA), 13, 1995, p337 - 338
DOLAN, F, TAYLOR, D, BLACKIE, PA, EMPIRICAL MODELING OF THE TENSILE PROPERTIES OF HIGH-IMPACT POLYSTYRENE IN TERMS OF ITS SECONDARY PHASE MORPHOLOGY, KEY ENGINEERING MATERIALS, 99-1, 1995, p79 - 84
TAYLOR, D, LI, J, GIESE, A, SHORT FATIGUE-CRACK GROWTH IN CAST-IRON DESCRIBED USING P-A CURVES, INTERNATIONAL JOURNAL OF FATIGUE, 17, 1995, p201 - 206
Looney, L., Hurst, R.C. and Taylor, D., The effect of high pressure hydrogen on the creep fracture of notched ferritic steel components, Proc.AMPT'95, 1995
McNamara, B.P., Toni, A. and Taylor, D., Effects of Implant Material Properties and Implany-Bone Bonding on Stress-Shielding in Cementless Total Hip Arthroplasty, Key Engineering Materials, 99-100, 1995, p309 - 314
Taylor, D. and O'Donnell, M., Notch Geometry Effects in Fatigue, a Conservative Design Approach, Journal of Engineering Failure Analysis, 1, 1995, p275 - 287
MCNAMARA, BP, CRISTOFOLINI, L, TONI, A, TAYLOR, D, EVALUATION OF EXPERIMENTAL AND FINITE-ELEMENT MODELS OF SYNTHETIC AND CADAVERIC FEMORA FOR PRECLINICAL DESIGN-ANALYSIS, CLINICAL MATERIALS, 17, 1995, p131 - 140
Taylor, D., "Damage Accumulation and Failure Prediction at Stress Singularities", 2nd World Cong.Biomechanics, Amsterdam, 1994
Prendergast, P.J., Toland, S.J., Reid, A.J., Corrigan, J. and Taylor, D., "A study of external fixator design concepts by finite element analysis and mechanical testing", Transactions of the European Orthopaedic Research Society, 4, 1994, pp26 - 26
Dolan, F., Taylor, D. and Blackie, P.A., "A study of the influence of rubber particle size and rubber phase volume on fatigue behaviour in HIPS", Polymat'94, London, 1994
Taylor, D. and Lee, T.C., "Formation of a Bioengineering Section", Irish Journal of Medical Science, 163, 1994, p447
Taylor, D. and O'Donnell, M., "Notch Effects in High Cycle Fatigue: A Simple, Unified Approach", Fatigue, 93, EMAS(UK), 1994, pp459 - 464
Dolan, F. , Taylor, D. and Blackie, P.A., "Empirical modelling of rubber phase volume and particle size effects on monotonic tensile properties in high impact polystyrene", Polymat'94, London, 1994
Lee TC, Mulville JP, Prendergast PJ and Taylor D, A model for the study of bone adaptation under altered load, Proc.2nd World Congress of Biomechanics, Amsterdam, 2, 1994, pp239 - 239
Taylor, D., Prendergast, P. and McNamara, B., "Fatigue and Repair Processes in Human Bone", Fatigue, 93, EMAS(UK), 1994, pp1435 - 1440
McNamara, B.P., Cristofolini, L., Toni, A. and Taylor, D., Effects of bone-prosthesis interface bonding on stress shielding in cementless THA, ASME winter meeting, Chicago, 1994
Toni, A., McNamara, B.P., Sudanese, A., Baruffaldi, F., Calista, F., Taylor, D. and Giunti, A., Bone remodelling after total hip arthroplasty, 2, Proc.2nd World Congress of Biomechanics, Amsterdam, 1994, pp37 - 37
Looney, L., Hurst, RC. and Taylor, D., "The Behaviour of Notched Petro-Refinery Steel Components at High Temperature", ECF-10, Berlin, 1994
McNamara, B.P., Cristofolini, L., Toni, A., Taylor, D. and Giunti, A., Stress shielding predicted using a composite material femur,, Proc.2nd World Congress of Biomechanics, Amsterdam, 1, 1994, pp101 - 101
TAYLOR, D, LEE, TC, THE FORMATION OF A BIOENGINEERING SECTION OF THE ROYAL-ACADEMY-OF-MEDICINE IN IRELAND, IRISH JOURNAL OF MEDICAL SCIENCE, 163, 1994, p447 - 447
PRENDERGAST, PJ, TAYLOR, D, PREDICTION OF BONE ADAPTATION USING DAMAGE ACCUMULATION, JOURNAL OF BIOMECHANICS, 27, 1994, p1067 - 1076
Taylor, D., Martin, C., Cornelis, B. and Jones, M.E.B., An isoelastic prosthesis using a new composite material, J.Eng.in Medicine (Proc.I.Mech.E.), 1993, p121 - 125
Culleton, T., Prendergast, P.J. and Taylor, D., Fatigue failure in the cement mantle of an artificial hip joint, Clinical Materials, 12, 1993, p95 - 102
Brady, C., Taylor, D. and O'Brien, M., Whiplash and Temporomandibular Joint Dysfunction, J.Irish Dental Association, 39, 1993, p69 - 72
Prendergast, P.J., Reid, A.J., Corrigan, J. and Taylor, D., "Structural analysis of a half-pin bilateral external fixator", 39th Annual Meeting Orthopaedic Research Society (ORS), 1993
P.J.Prendergast, H.Weinans, R.Huiskes and D.Taylor, "Bone structure and dynamics of bone adaptation in response to accumulative damage", Key Engineering Materials, 86-87, 1993, pp187 - 192
Taylor, D. and Li, J., Sourcebook on Fatigue Crack Propagation: Thresholds and Crack Closure, UK, EMAS, 1993, 310pp
McNamara, B.P., Prendergast, P.J., Toni, A. and Taylor, D., A computer simulation of bone adaptation in response to an accumulative damage stimulus, BOAFE1-10,13., 4th Int.Symp.on Computer Simulation in Biomechanics, Paris, July 1993, 1993
Taylor, D., Review of "Biomechanics: Materials - A Practical Approach", , by Vincent et al , Metals and Materials, 1993
TAYLOR, D, ON THE USE OF P-A PLOTS TO MODEL THE BEHAVIOR OF SHORT FATIGUE CRACKS, INTERNATIONAL JOURNAL OF FATIGUE, 14, 1992, p163 - 168
Prendergast, P.J. and Taylor, D., The design of intramedullary prostheses to prevent bone loss: predictions based on damage-stimulated remodelling, J.Biomedical Engineering, 14, 1992, p499 - 505
Taylor, D., The definition and measurement of crack closure, Engineering Fracture Mechanics, 43, 1992, p109 - 115
Taylor, D. and Bonadio, F., "The Body Builders", Technology Ireland, 1992, p32 - 35
Prendergast, P.J., McNamara, B.P. and Taylor, D., "Prediction of bone adaptation based on accumulative damage and repair: finite element simulations", Computer Methods in Biomechanics and Biomedical Engineering, Swansea, UK, Books and Journals International Ltd, 1992, pp40 - 49
Culleton, T.P., Prendergast, P.J. and Taylor, D., "Experimental Modelling of the Artificial Hip Joint", TUBES Spring Meeting, 1992
MCNAMARA, BP, PRENDERGAST, PJ, TAYLOR, D, PREDICTION OF BONE ADAPTATION IN THE ULNAR-OSTEOTOMIZED SHEEPS FORELIMB USING AN ANATOMICAL FINITE-ELEMENT MODEL, JOURNAL OF BIOMEDICAL ENGINEERING, 14, 1992, p209 - 216
TAYLOR, D, CLANCY, OM, THE FATIGUE PERFORMANCE OF MACHINED SURFACES, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 14, 1991, p329 - 336
Prendergast, P.J., Lee, T.C. and Taylor, D., Theoretical Prediction of Bone Remodelling using a Damage Stimulus, Journal of Anatomy (Anat.Soc.Great Britain and Ireland), 179, 1991, p218
Li, J. and Taylor, D., "Short Fatigue Cracks", IMF 7, Limerick, 1991
Taylor, D., "Fatigue of Biomaterials", Fatigue, 90, MCEP (UK), 1991, pp55 - 64
Martin, C., Cornelis, B., Jones, M.E.B. and Taylor, D., "Manufacture of an Artificial Hip Joint Using a Composite Material", Flow Processes in Composite Materials, Univ. of Limerick, 1991
TAYLOR, D, STANIASZEK, IAN, KNOTT, JF, WHEN IS A CRACK NOT A CRACK - SOME DATA ON THE FATIGUE BEHAVIOR OF CRACKS AND SHARP NOTCHES, INTERNATIONAL JOURNAL OF FATIGUE, 12, 1991, p397 - 402
Taylor, D., Prendergast, P. and McArdle, J.V., "Fatigue in the Artificial Hip Joint: Improvements Through Fibre Reinforcement of Bone Cement", Fatigue, 90, Publ.MCEP (UK), 1991, pp827 - 827
Taylor, D., Byrne, P. and Li, J., "Fatigue Analysis: the Distinction Between Cracks and Notches", IMF 7, Limerick, 1991
Greenfield, Allen, D., Byrne, P. and Taylor, D., "Surface Roughness Effects on Fatigue: A Fracture Mechanics Approach", Fatigue, 90, MCEP (UK), 1991, pp391 - 391
Prendergast. P.J., McCormack, B., Gunawardhana, T. and Taylor, D., "The Effect of Prosthesis Orientation on Stress Shielding using Finite Element Analysis - Indications as to Bone Remodelling", Interfaces in Medicine and Mechanics, edited by Williams et al , 2, Elsevier, 1991, pp329 - 329
PRENDERGAST, PJ, TAYLOR, D, STRESS-ANALYSIS OF THE PROXIMOMEDIAL FEMUR AFTER TOTAL HIP-REPLACEMENT, JOURNAL OF BIOMEDICAL ENGINEERING, 12, 1990, p379 - 382
Taylor, D., Crack-like notches and notch-like cracks, Proc. ECF-8, Turin, October 1990, 1990
Prendergast, P., Monaghan, J. and Taylor, D., Materials Selection in the Artificial Hip Joint Using Finite Element Analysis, Clinical Materials, 4, 1989, p361
Taylor, D. and Moalic, J-M., "Fatigue Behaviour of Carbon Fibre Reinforced Bone Cement", Proc.I.Mech.E. conference on Engineering in Orthopaedics, 1989, pp33 - 33
Macey, A., McManus, F. and Taylor, D., Sub-capital Fracture in a Femoral Prosthesis: Brief Report, Engineering in Medicine, Proc.I.Mech.E Part H, 203, 1989
Taylor, D., Tanaka, et al, Review of Statistical Research on Fatigue and Fracture", "Metals and Materials", 1989
Taylor, D. and Delestre, C., "The Use of Textiles for the Reinforcement of Bone Cement", Proc.TIMS, Textiles in Medicine and Surgery, UMIST, Manchester, UK, 1989, pp1 - 1
Henn, G., Prendergast, P. and Taylor, D., "Assessment of a Particulate Composite Material for use in Hip Joint Prostheses", IMF6, Dublin, 1989, pp283 - 283
Byrne, P., Taylor, D. and Allen, D., "Fatigue Behaviour of Rough Surfaces: Some Initial Findings", IMF6, Dublin, 1989, pp95 - 95
Taylor, D., Fatigue Thresholds, UK, Butterworths, 1989, 220pp
Prendergast, P. and Taylor, D., "A Continuum Damage Approach to Bone Remodelling", IMF6, Dublin, 1989, pp301 - 301
TAYLOR, D, THE MEASUREMENT OF NEAR-THRESHOLD FATIGUE CRACK-GROWTH, ENGINEERING FRACTURE MECHANICS, 32, 1989, p177 - 181
Taylor, D., Clarke, F.M., McCormack, B. and Sheehan, J., Reinforcement of Bone Cement using Metal Meshes, Engineering in Medicine, Proc.I.Mech.E Part H, 203, 1989
Taylor, D., Moalic, J-M, Clarke, F.M., McCormack, B. and Sheehan, J., Fibre Reinforcement of Bone Cement, Engineering in Medicine, 17, 1988, p31
Taylor, D. and McGuckian, M., "Lunar Temperature Measurements at Birr Castle", Science in Ireland 1800-1930 Tradition and Reform, TCD (Ireland), 1988, pp115 - 115
Taylor, D., Review of "Materials Data for Cyclic Loading", by Boller and Seeger , "Metals and Materials", 1988, p640
Taylor, D., Fibre Reinforcement of Bone Cements, J.Biomed.Polymers, 4, 1988, p1
TAYLOR, D, FATIGUE THRESHOLDS - THEIR APPLICABILITY TO ENGINEERING SITUATIONS, INTERNATIONAL JOURNAL OF FATIGUE, 10, 1988, p67 - 79
Taylor, D., "Fatigue Failure in Bone Cements for Hip Joint Implants", Fatigue, 87, EMAS (UK), 1988, pp1353 - 1353
McConnell, R.J., Moriarty, C. and Taylor, D., Fracture Strength of Resin-Metal Bonds, IDFC-5, Cork, 1987, 1987, pp1 - 1
Taylor, D. and McCormack, B., Durability of Materials for Orthopaedic Implants, IDFC-5, Cork, 1987, 1987, pp35 - 35
BRAID, JEM, TAYLOR, D, KNOTT, JF, A MODEL FOR FATIGUE THRESHOLDS AT HIGH R RATIOS, CANADIAN METALLURGICAL QUARTERLY, 26, 1987, p161 - 165
Clancy, O., Ponsonby, J., McCarthy, L. and Taylor, D., Fatigue Behaviour of Shot-Peened Surfaces, Surface Engineering, 3, 1987, p64
Taylor D, "Fatigue of Short Cracks; the Limitations of Fracture Mechanics", The Behaviour of Short Fatigue Cracks (EGF1), MEP (UK), 1986, pp479 - 479
McCurtin, C., Taplin, D.M.R., Taylor, D. and Taylor, N.G., "The Effect of Multiaxial Stress States on Creep and Fracture of Alloy 800H", High Temperature Alloys, Liege, Oct.6-9, paper III, (1.6), 1986
TAYLOR, D, THE EFFECT OF CRACK LENGTH ON FATIGUE THRESHOLD, FATIGUE OF ENGINEERING MATERIALS AND STRUCTURES, 7, 1985, p267 - 277
Hunter, C., Shuter, D. and Taylor, D., Transformation Kinetics of a Nickel-Aluminium Bronze Alloy, IDFC-3, Galway, 1985, 1985
Ponsonby, J., McCarthy, L. and Taylor, D., The Effect of Peening on Fatigue Properties, IDFC-3, Galway, 1985, 1985
Taylor, D., "An Analysis of Data on Fatigue Crack Propagation Thresholds", Fatigue, 84, EMAS (UK), 1985, pp327 - 327
Taylor, D., The Effect of Crack Length on Fatigue Thresholds, Fatigue of Engineering Materials and Structures, 7, 1984, p267
Taylor, D., "The Fatigue Crack Propagation Threshold", IDFC-2, Limerick, 1984, pp155 - 155
Taylor, D., Compendium of Fatigue Thresholds and Growth Rates, UK, EMAS, 1984, 380pp
BROWN, CW, THE EFFECTS OF TEXTURE AND GRAIN-SIZE ON THE SHORT FATIGUE CRACK-GROWTH RATES IN TI-6AL-4V, unknown, 1983, 35, ISI Web of Science, 1983, ppA14 - A15
Taylor, D. and Knott, J.F., Growth of Fatigue Cracks from Casting Defects, Nickel-Aluminium Bronze Metals Technology, 9, 1982, p221
Taylor, D., Euromech Colloquium on Short Fatigue Cracks, Fatigue of Engineering Materials and Structures, 5, 1982, p305
Taylor, D., "A Model for the Estimation of Fatigue Crack Threshold Stress Intensities in Materials with Various Different Microstructures", Fatigue Thresholds, 1982
Taylor, D. and Knott, J.F., Fatigue Crack Propagation Behaviour of Short Cracks: The Effect of Microstructure, Fatigue of Engineering Materials and Structures, 4, 1981, p147
Non-Peer-Reviewed Publications
Olivia Hassett and David Taylor, 'Exo Endo', Trinity College Dublin, 2015, -
Olivia Hassett and David Taylor, 'The Art and Science of Process', 2014, -
Hoey D, Taylor D and O'Reilly P, The role of defects in the fatigue strength of bone cement, Bioengineering in Ireland 13, Enniskillen, Northern Ireland, January 2007, edited by Orr J , RAMI, 2007, pp53-
Hoey D, Taylor D and O'Reilly P, Predicting fatigue failure in bone cement, Bioengineering in Ireland 12, Galway, January 2006, edited by P.McHugh , Royal Academy of Medicine in Ireland, 2006, pp43-
Byrne, P.A.S. and Taylor, D., "Fatigue Design": Allowing for Surface Finish, IMC12, Cork, 1996
Lyons, G., Brady, C., Taylor, D. and O'Brien, M., "Rear-end Impacts and Temporomandibular Joint Injury", TUBES Spring meeting, 1995, pp6 - 6
Taylor, D., Prendergast, P.J. and McNamara, B.P., "Fatigue in Bone: Modelling the Growth of Short Cracks", TUBES Spring meeting, 1995, pp7 - 7
Dolan, F., Taylor, D. and Blackie, P., "HIPS: Rubber phase volume and particle size effects on monotonic tensile properties", Lean Production, From Concept to Product, edited by A.Storrar , QUB, 1994
Prendergast, P.J., McCormack, B.A.O. and Taylor, D., "Innovation Initiatives in Bioengineeering - The Design Forum", Lean Production, From Concept to Product, edited by A.Storrar , QUB, 1994, pp319 - 325
McNamara, B., Toni, A. and Taylor, D., "Effects of implant material properties and implant-bone bonding on stress shielding in cementless total hip arthroplasty", , Lean Production, From Concept to Product, edited by A.Storrar , QUB, 1994
Looney, L., Hurst, R.C. and Taylor, D., "The Development of Methods for Assessing the Creep crack Growth Behaviour of Materials in Elevated Temperature, Hydrogen Service", Key Engineering Materials, 86-87, 1993, pp33 - 40
Culleton, T.P., Prendergast, P.J. and Taylor, D., "Problems Associated with Experimental Accelerated Fatigue Testing of the Artificial Hip Joint", Key Engineering Materials, 86-87, 1993, pp199 - 206
Prendergast, P.J., McCormack, B. and Taylor, D., "Stress Analysis and Materials Selection for Hip Prosthesis Design", TUBES Spring Meeting, 1992
Culleton, T. and Taylor, D., "Fatigue in the Artificial Hip Joint: Simulation and Observation", IMF 7, Limerick, 1991
Leonard, C., Bryce, D. and Taylor, D., "Heat Treatment of Aluminium Bronzes", IDFC-4, Belfast, 1986, 1986, pp285 - 285
McCormack, B., Moalic, J-M. and Taylor, D., "Carbon Fibre Reinforced Polymers in Hip Joint Prostheses", IDFC-4, Belfast, 1986, 1986, pp273 - 273
O'Connor, B.P. and Taylor, D., "Weld Simulations in Aluminium Bronze" , IDFC-2, Limerick, 1984, pp91 - 91
Taylor, D., "Fatigue Crack Propagation at Slightly Elevated Temperatures", IDFC-1, Dublin, 1983, pp143-
Research Expertise
Description
Research and Professional Activities 1) Fatigue and Fracture of Materials and Components The study of fatigue failure and other mechanisms of fracture in metals and other materials. Fatigue crack propagation and fracture mechanics; fatigue life prediction of components; use of finite element analysis; the behaviour of stress concentrations. 2) Forensic Engineering Failure analysis and metallurgical examination of components for forensic purposes. Consultancy work to engineering companies on component design and life prediction. 3) Bioengineering The assessment of materials for use in human-body implants and other biomaterials. Fatigue and fracture properties of material in humans, animals and plants. Damage and repair in living organisms.Projects
- Title
- The Theory of Critical Distances
- Summary
- Development of new approaches in fracture mechanics, using theoretical analysis and experimental testing
- Date From
- Ongoing
- Title
- Bone Mechanics
- Summary
- Investigations into the strength and fracture of bone, including repair and adaptation. Theoretical modelling and experimental studies
- Date From
- Ongoing
- Title
- Mechanical Properties of Insect Cuticle
- Summary
- Investigations into structure/property/morphology relationships in cuticle as found in insect legs, wings etc, with particular reference to fracture mechanics and fatigue
- Date From
- Ongoing
Recognition
Awards and Honours
Haughton Medal (Royal Academy of Medicine in Ireland)
Memberships
Member of the Royal Irish Academy
Member of the Board of Directors of Medisolve, Ltd., an Irish healthcare consultancy company.
Fellow, Royal Academy of Medicine in Ireland (President, Bioengineering Section 1994-1996)
Fellow of the Institute of Engineers of Ireland
Chartered Engineer
Director of the Association of Consulting Forensic Engineers