Professor David Taylor

• Rajabi, H. Darvizeh, A. Shafiei, A. Taylor, D. Dirks, J.-H., Numerical investigation of insect wing fracture behaviour, Journal of Biomechanics, 48, (1), 2015, p89 - 94Journal Article, 2015, DOI , URL
• Mc Guinness, S. Taylor, D., Farmers' Perceptions and Actions to Decrease Crop Raiding by Forest-Dwelling Primates Around a Rwandan Forest Fragment, Human Dimensions of Wildlife: An International Journal, 19, (2), 2014, p179 - 190Journal Article, 2014, DOI , URL
• Mulargia, S. Dooley, C. Cristofolini, L. Taylor, D., Fracture and fatigue in osteocytes, Journal of the Mechanical Behavior of Biomedical Materials, 39, 2014, p231 - 237Journal Article, 2014, DOI , URL
• Bernasconi, A. Cosmi, F. Taylor, D., Analisys of the fatigue properties of different specimens of a 10% by weight short glass fibre reinforced polyamide 6.6, Polymer Testing, 40, 2014, p149 - 155Journal Article, 2014, DOI , URL
• Long, T. Qin, J. Atahan, P. Mooney, S. Taylor, D., Rising waters: New geoarchaeological evidence of inundation and early agriculture from former settlement sites on the southern Yangtze Delta, China, The Holocene, 24, (5), 2014, p546 - 558Journal Article, 2014, DOI , URL
• Taylor, D. Kinane, B. Sweeney, C. Sweetnam, D. O-Reilly, P. Duan, K., The biomechanics of bamboo: investigating the role of the nodes, Wood Science and Technology, 49, (2), 2014, p345 - 357Journal Article, 2014, DOI , URL
• Taylor, D., Fracture mechanics: Inspirations from nature, Fracture & Structural Integrity, 30, 2014, p1 - 6Journal Article, 2014, DOI , URL
• Susmel, L. Askes, H. Bennett, T. Taylor, D., Theory of Critical Distances versus Gradient Mechanics in modelling the transition from the short to long crack regime at the fatigue limit, Fatigue and Fracture of Engineering Materials and Structures, 36, (9), 2013, p861 - 869Journal Article, 2013, DOI , URL
• O'Dwyer, B. Crockford, L. Jordan, P. Hislop, L. Taylor, D., A palaeolimnological investigation into nutrient impact and recovery in an agricultural catchment, Journal of Environmental Management, 124, 2013, p147 - 155Journal Article, 2013, DOI , URL
• Keogh, L., O'Hanlon, P., O'Reilly, P., Taylor, D., Fatigue in bamboo, International Journal of Fatigue, 75, 2015, p51-56Journal Article, 2015, DOI
• Fatigue and Creep Failure in Musculoskeletal Tissues in, editor(s)Saleem Hashmi , Reference Module in Materials Science and Materials Engineering, Oxford, UK, Elsevier, 2015, pp1 - 71, [David Taylor]Book Chapter, 2015
• David Taylor, Fatigue resistant components: what can we learn from Nature?, Journal of Mechanical Engineering Science (Proc I Mech E Part C), 229, 2015, p1186 - 1193Journal Article, 2015, TARA - Full Text
• Lauren Mulcahy, C Curtin, R McCoy, David Taylor, T Clive Lee and Garry Duffy, The effect of bisphosphonate treatment on the biochemical and cellular events during bone remodelling in response to microinjury stimulation, European Cells and Materials, 30, 2015, p271 - 281Journal Article, 2015, TARA - Full Text
• Parle E, Herbaj S, Shiels F, Larmon H and Taylor D , Buckling failures in insect exoskeletons. , Bioinspiration and Biomimetics , 11, 2015, p016003 - 016003Journal Article, 2015, TARA - Full Text
• Torres AM, Matheny JB, Keaveny TM, Taylor D, Rimnac C and Hernandez CJ , Material heterogeneity in cancellous bone promotes deformation recovery after mechanical failure, PNAS, 113, 2016, p2892 - 2897Journal Article, 2016
• Parle E, Dirks J-H and Taylor D, Bridging the gap: wound healing in insects restores mechanical strength by targeted deposition, Journal of the Royal Society Interface , 13, 2016, p20150984 - 20150984Journal Article, 2016, TARA - Full Text
• Taylor D, Walsh M, Cullen A and O'Reilly P, The fracture toughness of eggshell, Acta Biomaterialia , 37, 2016, p21 - 27Journal Article, 2016, TARA - Full Text
• Parle E, Larmon H and Taylor D , Biomechanical factors in the adaptations of insect tibia cuticle, PLoS ONE , 11, 2016, p0159262 - 0159262Journal Article, 2016, DOI , TARA - Full Text
• Taylor D, Impact damage and repair in shells of the limpet Patella vulgata, Journal of Experimental Biology, 219, (24), 2016, p3927 - 3935Journal Article, 2016, DOI , URL
• Parle E, Dirks J.-H, Taylor D, Damage, repair and regeneration in insect cuticle: The story so far, and possibilities for the future, Arthropod Structure & Development, 46, (1), 2016, 49-55Journal Article, 2016, DOI , URL
• Crupi G, Crupi V, Guglielmino E and Taylor D, Fatigue assessment of welded joints using critical distance and other methods, Engineering Failure Analysis, 12, 2005, p129 - 142Journal Article, 2005
• Reilly GA, McCormack BAO and Taylor D, Cutting sharpness measurement: a critical review, Journal of Materials Processing Technology, 153, 2004, p261 - 276Journal Article, 2004
• Taylor D, Cornetti P and Pugno N, The fracture mechanics of finite crack extension, Engineering Fracture Mechanics, 72, 2005, p1021 - 1038Journal Article, 2005
• Bellett D, Taylor D, Marco S, Guillois J and Pircher T, The fatigue behaviour of three-dimensional stress concentrators, International Journal of Fatigue, 27, 2005, p207 - 221Journal Article, 2005
• O'Brien FJ, Taylor D and Lee TC, The effect of bone microstructure on the initiation and growth of microcracks, Journal of Orthopaedic Research, 23, 2005, p475 - 480Journal Article, 2005
• Taylor D, Predicting fracture in bone and biomaterials, Bioengineering In Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp2 - 2Conference Paper, 2005
• Hazenberg JG, Taylor D and Lee TC, The effects of bone histomorphometry on microcrack growth and damage to cellular processe, Bioengineering in Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp18 - 18Conference Paper, 2005
• Mercy MV, O'Brien FJ, Lee TC and Taylor D, Failure mechanisms in bone - a mechanical and histological study, Bioengineering In Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp20 - 20Conference Paper, 2005
• Reilly G and Taylor D, Cutting bone: flourescent labelling of the damage zone in bovine cortical bone, Bioengineering In Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp21 - 21Conference Paper, 2005
• Kennedy OD, Brennan O, O'Brien FJ, Taylor D, Rackard SM and Lee TC, The contribution of bone turnover to reduced bone quality in osteoporosis, Bioengineering In Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp22 - 22Conference Paper, 2005
• Kasiri S, Reilly G and Taylor D, Cutting bone: numerical simulations of the failure process, Bioengineering In Ireland 11, Dublin , 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp55 - 55Conference Paper, 2005
• Mahony NJ, Donne B, O'Brien M, Taylor D and Lee TD, Reliability, measurement error and normal database for DEXA assessment of bone density at five sites in the ovine skeleton, Bioengineering In Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp60 - 60Conference Paper, 2005
• Dodds M, Taylor D, O'Reilly SP and McCormack D, Stabilisation of the dysplastic paediatric hip. A novel approach using a bioresorbable suture anchor, Bioengineering In Ireland 11, Dublin, 28-29 Jan 2005, edited by D.Fitzpatrick , 2005, pp74 - 74Conference Paper, 2005
• Parle E, Taylor D, The effect of aging on the mechanical behaviour of cuticle in the locust Schistocerca gregaria, Journal of the Mechanical Behavior of Biomedical Materials, 68, 2017, p247 - 251Journal Article, 2017, DOI , URL
• Dooley C, Taylor D, Self-healing materials: What can nature teach us?, Fatigue and Fracture of Engineering Materials and Structures, 2017, p655-669Journal Article, 2017, DOI , URL , TARA - Full Text
• Taylor, D., Observations on the role of fracture mechanics in biology and medicine, Engineering Fracture Mechanics, 423, 2018, p422-430Journal Article, 2018, DOI , URL
• Santus, C. and Taylor, D. and Benedetti, M., Determination of the fatigue critical distance according to the Line and the Point Methods with rounded V-notched specimen, International Journal of Fatigue, 106, 2018, p208-218Journal Article, 2018, DOI , URL
• Rajabi, H. and Bazargan, P. and Pourbabaei, A. and Eshghi, S. and Darvizeh, A. and Gorb, S.N. and Taylor, D. and Dirks, J.-H., Wing cross veins: an efficient biomechanical strategy to mitigate fatigue failure of insect cuticle, Biomechanics and Modeling in Mechanobiology, 16, (6), 2017, p1947-1955Journal Article, 2017, DOI , URL
• Cicero, S. and Cendón, D. and Taylor, D. and Berto, F., Editorial â€" Mechanics of notches, Theoretical and Applied Fracture Mechanics, 90, 2017, p203Journal Article, 2017, DOI , URL
• Taylor, D., The failure of polypropylene surgical mesh in vivo, Journal of the Mechanical Behavior of Biomedical Materials, 88, 2018, p370-376Journal Article, 2018, DOI , URL
• O'Neill, M. and Cafiso, D. and Mala, R. and La Rosa, G. and Taylor, D., Fracture toughness and damage development in limpet shells, Theoretical and Applied Fracture Mechanics, 96, 2018, p168-173Journal Article, 2018, DOI , URL
• Taylor, D., Measuring fracture toughness in biological materials, Journal of the Mechanical Behavior of Biomedical Materials, 77, 2018, p776-782Journal Article, 2018, DOI , URL
• O†Neill, M. and Mala, R. and Cafiso, D. and Bignardi, C. and Taylor, D., Repair and remodelling in the shells of the limpet Patella vulgata, Journal of the Royal Society Interface, 15, (145), 2018Journal Article, 2018, DOI , URL
• Vargiu, F. and Sweeney, D. and Firrao, D. and Matteis, P. and Taylor, D., Implementation of the Theory of Critical Distances using mesh control, Theoretical and Applied Fracture Mechanics, 92, 2017, p113-121Journal Article, 2017, DOI , URL
• Taylor, D., The Theory of Critical Distances: A link to micromechanisms, Theoretical and Applied Fracture Mechanics, 90, 2017, p228-233Journal Article, 2017, DOI , URL
• Presbítero, G. and Gutiérrez, D. and Taylor, D., Osteoporosis and fatigue fracture prevention by analysis of bone microdamage, Minerals, Metals and Materials Series, Part F6, 2017, p319-330Journal Article, 2017, DOI , URL
• O'Neill, M, DeLandro D and Taylor D, Age related responses to injury and repair in insect cuticle, Journal of Experimental Biology, 222, 2018, pjeb182253Journal Article, 2018, DOI , TARA - Full Text
• Taylor D, The theory of critical distances applied to multiscale toughening mechanisms, Engineering Fracture Mechanics, 209, 2019, p392 - 403Journal Article, 2019, DOI , TARA - Full Text
• Lefevre B, O'Reilly P, West R and Taylor D, A new method for joining bamboo culms, Engineering Structures, 190, 2019, p1 - 8Journal Article, 2019, DOI
• Santus C, Taylor D and Benedetti M , Experimental determination and sensitivity analysis of the fatigue critical distance obtained with rounded V-notched specimen. , International Journal of Fatigue, 113, 2018, p113 - 125Journal Article, 2018
• Taylor D, Through-life engineering: inspirations from nature, Procedia Manufacturing, 16, 2019, p163 - 170Journal Article, 2019
• O'Neill M and Taylor D, Repair of Microdamage caused by Cyclic Loading in Insect Cuticle., Journal of Experimental Zoology Part A., 333, 2019, p20 - 28Journal Article, 2019
• Bobby Gillham, Andrey Yankin, Fionnan McNamara, CharlesTomonto, David Taylor, Rocco Lupoi, Application of the Theory of Critical Distances to predict the effect of induced and process inherent defects for SLM Ti-6Al-4V in high cycle fatigue, CIRP Annals - Manufacturing Technology, 70, (1), 2021, p171 - 174Journal Article, 2021, DOI
• Bobby Gillham, Andrei Yankin, Harry Shipley, Fionnan McNamara, Charles Tomonto, Garret O'Donnell, Daniel Trimble, Shuo Yin, David Taylor, Rocco Lupoi, The Analysis of Small-Scale Notches on the Fatigue Performance of SLM Ti-6Al-4V; A Theory of Critical Distances Approach, Key Engineering Materials, 926, 2022, p250 - 267Journal Article, 2022, DOI
• Taylor D and Barton E, In-vitro characterization of the erosion of soft tissues by surgical mesh, Journal of the Mechanical Behavior of Biomedical Materials, 101, 2020, 103420Journal Article, 2020
• Schmidt J, O"Neill M, Dirks J-H and Taylor D , An investigation of crack propagation in an insect wing using the theory of critical distances, Engineering Fracture Mechanics, 2020, p107052Journal Article, 2020
• Palomba G, Hone T, Taylor D and Crupi V, Bio-inspired protective structures for marine applications, IDFC-4, Belfast, 1986, 15, 2020, pp056016Conference Paper, 2020
• Hone T, Cahill, L, Robinson T, Korde C and Taylor D , The splitting of bamboo in response to changes in humidity and temperature, Journal of the Mechanical Behavior of Biomedical Materials, 111, 2020, p103990Journal Article, 2020
• Taylor D, Analysis of Fracture Data from Notched Specimens Can Provide Information on Multiscale Toughening Mechanisms, Theoretical and Applied Fracture Mechanics, 109, 2020, p102730Journal Article, 2020
• Harford N, O"Connor N and Taylor D (, Impact resistance of limpet shells: a study of local adaptations, Applied Physics A, 126, 2020, p757Journal Article, 2020
• Schmidt A and Taylor D, Erosion of soft tissue by polypropylene mesh products, Journal of the Mechanical Behavior of Biomedical Materials, 115, 2021, p104281Journal Article, 2021
• Schmidt A, O'Brien G and Taylor D, The development of equipment to measure mesh erosion of soft tissue, Materials, 14, 2021, p1 - 13Journal Article, 2021
• Hone T, Mylo M, Speck O, Speck T and Taylor D , Failure mechanisms and bending strength of fuchsia magellanica v gracilis stems, Journal of the Royal Society Interface, 18, 2021, p20201023Journal Article, 2021
• Hone T, Kelehan S and Taylor D , Fracture and repair in a bioinspired self-healing structure, Fatigue and Fracture of Engineering Materials and Structures, 44, 2021, p3373 - 3383Journal Article, 2021
• Morgan D, Quinlan S and Taylor D , Using the theory of critical distances to predict notch effects in fibre composites, Theoretical and Applied Fracture Mechanics, 118, 2022, p103285Journal Article, 2022
• Chaves V, Navarro A, Susmel L and Taylor D , Analysis of biaxial fatigue limit models for cases with circular notches, INTERNATIONAL JOURNAL OF FATIGUE, 162, 2022, 106981Journal Article, 2022
• Seibert P, Taylor D, Berto F and Razavi S(, Energy TCD " Robust and simple failure prediction unifying the TCD and ASED criterion, Engineering Fracture Mechanics, 271, 2022, p108652Journal Article, 2022
• Benson J, Wickham C, Rowan T and Taylor D, Predicting the Degradation of Slip Resistance in Paving Materials, WEAR, 512, 2023, p204520Journal Article, 2023
• Krueger ET, Büscher JV, Hoey DA Taylor D, O'Reilly PJ, Crowley QG, Wanted Dead or Alive: Skeletal Structure Alteration of Cold-Water Coral Desmophyllum pertusum (Lophelia pertusa) from Anthropogenic Stressors, Oceans, 4, (1), 2023, p68 - 79Journal Article, 2023, DOI , TARA - Full Text
• Bobby Gillham, Andrei Yankin, Fionnan McNamara, Charles Tomonto, Chunjie Huang, Jeroen Soete, Garret O'Donnell, Daniel Trimble, Shuo Yin, David Taylor, Rocco Lupoi, Tailoring the Theory of Critical Distances to better assess the combined effect of complex geometries and process-inherent defects during the fatigue assessment of SLM Ti-6Al-4V, International Journal of Fatigue, 172, 2023, p107602Journal Article, 2023, DOI
• O'Keeffe, C. and Taylor, D. and Lally, C. and Kelly, D.J., Morphological induced improvements in the bulk mechanical properties of chemically etched additively manufactured Ti-6Al-4V micro-struts, Additive Manufacturing, 75, (103748), 2023Journal Article, 2023, DOI
• Marsavina L, Sapora A, Susmel L and Taylor D, The application of the theory of critical distances to non-homogenous materials., Fatigue and Fracture of Engineering Materials and Structures, 46, (4), 2023, p1314 - 1329Journal Article, 2023
• Taylor D, Mechanical fatigue in trees mitigated by annual growth: a theoretical model, Journal of Theoretical Biology, 569, 2023, p111523 - 111523Journal Article, 2023
• Chaves C, Balbin JA, Navarro A, Susmel L and Taylor D, ) Calculations of biaxial fatigue limits with models using the experimental crack direction, International Journal of Fatigue, 2023, p107726 - 107726Journal Article, 2023
• S Brooks, R Roy, J-H Dirks and D Taylor, A systematic study of biological SE systems from complexity and design perspectives., Journal of Engineering Design, 34, (11), 2023, p897 - 921Journal Article, 2023
• Hazenberg JG, Taylor D and Lee TC, Mechanisms of short crack growth at constant stress in bone, Biomaterials, 27, 2006, p2114 - 2122Journal Article, 2006
• Taylor D, Notch size effects in multiaxial fatigue, Progettazione a fatica in presenza di multiassialita tensionali, Ferrara, Italy, edited by L.Susmel , IGF, 2005, pp3 - 14Conference Paper, 2005
• O'Brien, F.J.; Hardiman, D.A.; Hazenberg, J.; Mercy, M.V.; Mohsin, S.; Taylor, D. and Lee, T.C., The behaviour of microcracks in compact bone, European Journal of Morphology, 42, (1-2), 2005, p71 - 79Journal Article, 2005, DOI , URL
• O'Brien, F.J.; Taylor, D and Lee, T.C., The effect of bone microstructure on the initiation and growth of microcracks. , Journal of Orthopedic Research, 23, (2), 2005, p475 - 480Journal Article, 2005, DOI , URL
• O'Brien, F.J.; Lee, T.C. and Taylor, D , Microcrack accumulation at different intervals during fatigue testing of compact bone., Journal of Biomechanics , 36, (7), 2003, p973 - 980Journal Article, 2003, DOI , URL
• Lee, T.C.; Mohsin, S.; Taylor, D.; Parkesh, R.; Gunnlaugsson, T.; O'Brien, F.J.; Giehl, M. and Gowin, W. , Detecting microdamage in bone , Journal of Anatomy, 203, (2), 2003, p161 - 172Journal Article, 2003, DOI , URL
• O'Brien, F.J.; Lee, T.C. and Taylor, D, An improved labelling technique for monitoring microcracks growth in compact bone., Journal of Biomechanics, 35, 2002, p523 - 526Journal Article, 2002, DOI , URL
• Taylor D, O'Brien F, Lee TC , A theoretical model for the simulation of microdamage accumulation and repair in compact bone., Meccanica, 37, (4-5), 2002, p397 - 406Journal Article, 2002, DOI , URL
• Taylor D, O'Brien F, Prina-Mello A, Ryan C, O'Reilly P, Lee TC , Compression data on bovine bone confirms that a "stressed volume" principle explains the variability of fatigue strength results. , Journal of Biomechanics, 32, (11), 1999, p1199 - 1203Journal Article, 1999, DOI , URL
• Lee TC, O'Brien FJ, Taylor D , The nature of fatigue damage in bone. , International Journal of Fatigue, 22, 2000, p847 - 853Journal Article, 2000, DOI , URL
• O'Brien FJ, Taylor D, Dickson GR, Lee TC , Visualisation of three-dimensional microcracks in compact bone. , JOURNAL OF ANATOMY, 197, (3), 2000, p413 - 420Journal Article, 2000, DOI , URL
• Simon P. Wilson and D. Taylor, Statistical analysis and prediction with short fatigue crack data using a population model, Fatigue and Fracture of Engineering Materials and Structures, 22, (1), 1999, p67 - 76Journal Article, 1999, DOI
• Simon P. Wilson and D. Taylor, Reliability assessment from fatigue micro-crack data, IEEE Transactions on Reliability, 46, (2), 1997, p165 - 172Journal Article, 1997, DOI , TARA - Full Text
• Susmel L and Taylor D, A simplified approach to apply the theory of critical distances to notched components under torsional fatigue loading, International Journal of Fatigue, 28, 2006, p417 - 430Journal Article, 2006
• Hazenberg JG, Lee TC and Taylor D, The role of osteocytes in functional boen adaptation, BoneKey-Osteovision , 3, 2006, p10 - 16Journal Article, 2006
• Taylor D, The theory of critical distances applied to the prediction of brittle fracture in metallic materials , Structural Integrity and Durability, 1, 2006, p145 - 154Journal Article, 2006
• Wiersma S, Dolan F and Taylor D, Fatigue and fracture in materials used for micro-scale biomedical components, Biomedical materials and engineering, 16, 2006, p137 - 146Journal Article, 2006
• Bellett D and Taylor D, The effect of crack shape on the fatigue limit of three-dimensional stress concentrations, International Journal of Fatigue, 28, 2006, p114 - 123Journal Article, 2006
• Lee TC and Taylor D, Quantification of ovien bone adaptation to altered load: morphometry, density and surface strain, European Journal of Morphology, 41, 2005, p117 - 125Journal Article, 2005
• O'Brien FJ, Hardiman D, Hazenberg JG, Mercy M, Taylor D and Lee TC, The behaviour of microcracks in compact bone, European Journal of Morphology, 42, 2005, p71 - 79Journal Article, 2005
• Wiersma S and Taylor D, Fatigue of materials used in microscopic components, Fatigue and Fracture of Engineering Materials and Structures, 28, 2005, p1153 - 1160Journal Article, 2005
• Taylor D, Theoretical modelling of damage, repair and adaptation in bone, Proceedings of the First International Conference on the Mechanics of Biomaterials and Tissues, Hawaii, USA, December 2005, Elsevier, 2005, ppK10-Conference Paper, 2005
• Cornetti P, Pugno N and Taylor D, Strength predictions via finite fracture mechanics, Proceedings of the 11th International Conference on Fracture, Turin, Italy, March 2005, edited by A.Carpinteri , 2005, pp73 - 83Conference Paper, 2005
• Taylor D, Finite fracture mechanics and the theory of critical distances, Advanced in Fracture and Damage Mechanics IV, Majorca, Spain, July 2005, edited by M.Aliabadi , 2005, pp565 - 570Conference Paper, 2005
• O'Brien F, Taylor D and Lee TC, The role of osteons as microstructural barriers in compact bone, First Internationa lConference on the Mechanics of Biomaterials and Tissues, December 2005, Elsevier, 2005, ppO134-Conference Paper, 2005
• Taylor D, Telling stories about bone: Haughton Lecture 2006, Bioengineering in Ireland 12, Galway, January 2006, edited by P.McHugh , Royal Aademy of Medicine in Ireland, 2006, pp63 - 66Conference Paper, 2006
• Hazenberg JG, Matthews E, Lee TC and Taylor D, The effect of mini-plate configuration and location in mandibular fractures, Bioengineering in Ireland 12, Galway, January 2006, edited by P.McHugh , Royal Academy of Medicine in Ireland, 2006, pp135-Conference Paper, 2006
• Mauer P, Kennedy OD, Brennan O, Rackard SM, Taylor D, O'Brien FJ and Lee TC, Manufacturing mm-scale ovine cortical bone specimens for mechanical testing, Bioengineering in Ireland 12, Galway, January 2006, Royal Academy of Medicine in Ireland, 2006, pp85-Conference Paper, 2006
• Kennedy OD, Brennan O, Rackard SM, O'Brien FJ, Taylor D and Lee TC, The effect of osteoporosis on compact bone, Bioengineering in Ireland 12, Galway, January 2006, edited by P.McHugh , Royal Academy of Medicine in Ireland, 2006, pp26-Conference Paper, 2006
• Stokes EK, Fitzharris L, Fatigue & age, Proceedings of the 14th Congress of the World Confederation for Physical Therapy, 14th Congress of the World Confederation for Physical Therapy, Barcelona, 2003, 2003, ppRR-PL-1955Meeting Abstract, 2003
• Fatigue in, editor(s)Kaufmann T , Geriatric Rehabilitation Manual, USA, Elsevier Ltd, 2006, pp131 - 134, [Stokes EK, O'Connell C]Book Chapter, 2006
• O'Brien, F.J.; Taylor, D. and Lee, T.C. , Bone as a composite material: the role of osteons as barriers to crack growth in compact bone, International Journal of Fatigue, 29, 2007, p1051 - 1056Journal Article, 2007, DOI , URL
• Lee, T.C.; O'Brien, F.J.; Gunnlaugsson, T.; Parkesh, R. and Taylor, D. , Microdamage and bone mechanobiology, Technology and Healthcare , 14, (4-5), 2006, p359 - 365Journal Article, 2006, URL
• Taylor D, Analysis of fatigue failures in components using the theory of critical distances, Engineering Failure Analysis, 12, 2005, p906 - 914Journal Article, 2005
• Araújo JA , Susmel L, Taylor D, Ferro JCT and Mamiya EN , On the use of the theory of critical distances and the modified Wöhler Curve Method to estimate fretting fatigue strength of cylindrical contacts., International Journal of Fatigue, 29, 2007, p95 - 107Journal Article, 2007
• Taylor D, The theory of critical distances: a history and a new definition, Structural Durability and Health Monitoring, 2, 2006, p1 - 10Journal Article, 2006
• Hazenberg JG, Freeley M, Foran E, Lee TC and Taylor D, Microdamage: a cell transducing mechanism based on ruptured osteocyte processes, Journal of Biomechanics, 39, 2006, p2096 - 2103Journal Article, 2006
• Susmel L and Taylor D , Can the conventional multiaxial high-cycle fatigue criteria be reinterpreted in terms of the theory of critical distances? , Structural Durability and Health Monitoring, 2, 2006, p91 - 108Journal Article, 2006
• Cornetti P, Pugno N, Carpinteri A and Taylor D , A coupled stress and energy failure criterion, Engineering Fracture Mechanics , 73, 2006, p2021 - 2033Journal Article, 2006
• Susmel L and Taylor D , Non-propagating cracks and high-cycle fatigue failure in sharply notched specimens under in-phase mode I and II loading, Engineering Failure Analysis , 14, 2007, p861 - 876Journal Article, 2007
• Taylor D, Hazenberg JG and Lee TC , Living with cracks: damage and repair in human bone, Nature Materials, 6, 2007, p263 - 268Journal Article, 2007
• O'Brien FJ, Taylor D and Lee TC , Bone as a composite material: the role of osteons as barriers to crack growth in compact bone, International Journal of Fatigue, 29, 2007, p1051 - 1056Journal Article, 2007
• Hazenberg JG, Taylor D and Lee TC , The role of osteocytes and bone microstructure in preventing osteoporotic fractures, Osteoporosis International , 18, 2007, p1 - 8Journal Article, 2007
• Hazenberg JG, Taylor D and Lee , Dynamic short crack growth in bone, Technology and Health Care , 14, 2006, p393 - 402Journal Article, 2006
• TC, O'Brien FJ, Gunnlaugsson T, Parkesh R and Taylor D, Microdamage and bone mechanobiology, Technology and Health Care , 14, 2006, p359 - 365Journal Article, 2006
• Taylor D, Hazenberg JG and Lee TC , The cellular transducer in bone: what is it? , Technology and Health Care , 14, 2006, p367 - 377Journal Article, 2006
• Susmel L and Taylor D, The theory of critical distances to predict fatigue lifetime of notched components, Advances in Fracture and Damage Mechanics IV, Majorca, June 2005, edited by M.H.Aliabadi , 2005, pp411 - 416Conference Paper, 2005
• Reilly GA and Taylor D, An analysis of the fracture process and microdamage occurring during cutting of cortical bone, International Conference on the Mechanics of Biomaterials and Tissues, Hawaii, December 2005, edited by Ritchie RO, Taylor D and Teoh SH , 2005, pp268 - 268Conference Paper, 2005
• Susmel L and Taylor D, On the use of the theory of critical distances to estimate fatigue strength of notched components in the medium-cycle fatigue regime, Fatigue 2006, Atlanta, USA, May 2006, edited by Johnson WS , Elsevier, 2006, pp1045 - 1055Conference Paper, 2006
• Susmel L and Taylor D, On the use of the conventional high-cycle multiaxial fatigue criteria reinterpreted in terms of the Theory of Critical Distances, Fatigue 2006, Atlanta, USA, May 2006, edited by Johnson WS , Elsevier, 2006, pp1286 - 1296Conference Paper, 2006
• Taylor D, The role of defects in the fatigue strength of bone cement, Fatigue 2006, Atlanta, USA, May 2006, edited by Johnson WS , Elsevier, 2006, pp446 - 456Conference Paper, 2006
• Taylor D, Size effects in notched components, Fatigue 2006, Atlanta, USA, May 2006, edited by Johnson WS , Elsevier, 2006, pp547 - 557Conference Paper, 2006
• Pessot F, Susmel L and Taylor D, The theory of critical distances to predict static failures in notched brittle components subjected to multiaxial loading, Crack Paths, Parma, Italy, September 2006, edited by Carpinteri, A and Pook LS , University of Parma, 2006, pp299 - 309Conference Paper, 2006
• Susmel L and Taylor D, The theory of critical distances and the estimation of notch fatigue limits: L, ao and open notche, ICCES 07, Miami, USA, January 2007, 2007, pp797 - 802Conference Paper, 2007
• Kennedy O, Brennan O, Mauer P, Rackard S, O'Brien FJ, Taylor D and Lee TC , Fatigue induced microdamage in compact bone samples from control and ovariectomised sheep, Transactions of the Orthopaedic Research Society, San Diego, USA, January 2007, ORS, 2007, pp315-Conference Paper, 2007
• Kasiri S and Taylor D, Bone indentation: a critical distance approach, Bioengineering in Ireland 13, Enniskillen, Northern Ireland, January 2007, edited by Orr J , RAMI, 2007, pp7-Conference Paper, 2007
• Reilly G, Muir G, Kasiri S and Taylor D, The effect of indenter geometry on indentation force and microdamage in compact bone, Bioengineering in Ireland 13, Enniskillen, Northern Ireland, January 2007, edited by Orr J , RAMI, 2007, pp91-Conference Paper, 2007
• Taylor D, The theory of critical distances, European Conference on Fracture 16, Alexandroupolis, Greece, July 2007, 2007, pp236 - 246Conference Paper, 2007
• Taylor D, Hoey D and Sanz L, Fracture and fatigue of bone and bone cement, European Conference on Fracture 16, Alexandroupolis, Greece, July 2007, 2007, pp1342 - 1352Conference Paper, 2007
• Taylor D, The fracture mechanics of bone, 23rd Conference of GEF (Spanish Fracture Group), Albarracin, Spain, March 2006, 2006, pp1 - 12Conference Paper, 2006
• Taylor, D.; Hazenberg, J.; O'Brien, F.J. and Lee, T.C. , How does bone detect cracks?, Key Engineering Materials, 348-349, 2007, p57 - 60Journal Article, 2007, URL
• Susmel L and Taylor , A novel formulation of the theory of critical distances to estimate lifetime of notched components in the medium-cycle fatigue regime, Fatigue and Fracture of Engineering Materials and Structures, 30, 2007, p567 - 581Journal Article, 2007
• Bellett D, Taylor D and Moret F , A stress distribution remodelling technique , International Journal of Fracture, 143, 2007, p177 - 188Journal Article, 2007
• Crupi V, Guglielmino E, Risitano A and Taylor D, Different methods for fatigue assessment of T-welded joints used in ship structures, Journal of Ship Research, 51, 2007, p150 - 159Journal Article, 2007
• Taylor D, Fracture and repair of bone: a multiscale problem, Journal of Materials Science , 42, 2007, p8911 - 8918Journal Article, 2007
• Taylor D, ) Predicting fatigue in welded joints: new theories and some practical experience, Key Engineering Materials, 348, 2007, p557 - 560Journal Article, 2007
• Taylor D, Hazenberg J, O'Brien FJ and Lee TC , How does bone detect cracks? , Key Engineering Materials, 348, 2007, p57 - 60Journal Article, 2007
• Kasiri S, Reilly G, Taylor D , Simulation of bone indentation , WIT Transactions on Biomedicine and Health, 12, 2007, p113 - 121Journal Article, 2007
• Taylor D, The Theory of Critical Distances, Engineering Fracture Mechanics , 75, 2008, p1696 - 1705Journal Article, 2008
• Susmel L and Taylor D , The theory of critical distances to predict static strength of notched brittle components subjected to mixed mode loading, Engineering Fracture Mechanics, 75, 2008, p534 - 550Journal Article, 2008
• Araujo JA, Susmel L, Taylor D, Ferro JCT, Ferriera, J.L.A, On the prediction of high cycle fretting fatigue strength : Theory of Critical Distances versus hot spot approach, Engineering Fracture Mechanics, 75, 2008, p1763 - 1778Journal Article, 2008
• Hoey D and Taylor D , Fatigue in porous PMMA: the effect of stress concentrations, International Journal of Fatigue, 30, 2008, p989 - 995Journal Article, 2008
• Carpinteri A, Cornetti, P, Pugno N, Sapora A, Taylor D , A finite fracture mechanics approach to structures with sharp V notches, Engineering Fracture Mechanics, 75, 2008, p1736 - 1752Journal Article, 2008
• Kasiri S and Taylor D , A critical distance study of stress concentrations in bone, Journal of Biomechanics, 41, 2008, p603 - 609Journal Article, 2008
• Dendorfer S, Maier HJ, Taylor D and Hammer J, Anisotropy of the fatigue behaviour of cancellous bone, Journal of Biomechanics, 41, 2008, p636 - 641Journal Article, 2008
• Taylor D, Microstructural parameters in the theory of critical distances, Materials Science Forum , 567, 2008, p23 - 28Journal Article, 2008
• Taylor D, The Theory of Critical Distances: A New Perspective in Fracture Mechanics, Oxford, UK, Elsevier, 2007, 1 - 284ppBook, 2007
• Taylor D, Bone as a Structural Material: How Good is it?, Applied Biomechanics, Regensburg, Germany, June 2007, edited by J.Hammer , 2007, pp58 - 68Conference Paper, 2007
• Taylor D, Falsetti F, O'Brien FJ, O'Reilly P, Banville E, Lee TC , A fatigue based model of disuse osteoporosis, Computer Methods in Biomechanics and Biomedical Engineering, 4, 2001, p413-420Journal Article, 2001, DOI , URL
• Kennedy, O.D. , Brennan, O. , O'Brien, F.J. , Rackard, S.M. , Taylor, D. , Lee, T.C., The contribution of intracortical bone turnover to bone quality in osteoporosis, Proceedings of the 2005 Summer Bioengineering Conference , 2005 Summer Bioengineering Conference , 2005, 2005, pp1506-1507Conference Paper, 2005
• C. Santus, D. Taylor, Physically short crack propagation in metals during high cycle fatigue, International Journal of Fatigue, 2009Journal Article, 2009, DOI , TARA - Full Text
• Taylor D and Hoey D, High cycle fatigue of welded joints: the TCD experience, International Journal of Fatigue, 31, 2009, p20 - 27Journal Article, 2009, DOI
• Hoey D and Taylor D, Quantitative analysis of the effect of porosity on the fatigue strength of bone cement., Acta Biomaterialia, 5, 2009, p719 - 726Journal Article, 2009, DOI
• Kennedy OD, Brennan O, Rackard SM, Staines A, O'Brien FJ, Taylor D, Lee, TC, Effects of Ovariectomy on Bone Turnover, Porosity and Biomechanical Properties in Ovine Compact Bone 12-Months Post-Surgery, Journal of Orthopaedic Research, 27, 2009, p303 - 309Journal Article, 2009
• Susmel L and Taylor D , ) The modified wohler curve method applied along with the theory of critical distances to estimate finite life of notched components subjected to complex multiaxial loading paths, Fatigue and Fracture of Engineering Materials and Structures , 31, 2008, p1047 - 1064Journal Article, 2008
• Kennedy OD, Brennan O, Rackard SM, Mahony NJ, O'Brien FJ, Taylor D, Lee, TC , Effects of High bone Turnover on the Biomechanical Properties of the L3 Vertebra in a Model of Early Stage Osteoporosis, Spine, 33, 2008, p2518 - 2523Journal Article, 2008
• Kennedy OD, Brennan O, Rackard SM, Mauer P, O'Brien FJ, Taylor D, Lee, TC , The effects of increased intracortical remodeling on microcrack behaviour in compact bone, Bone, 43, 2008, p889 - 893Journal Article, 2008
• Kennedy O, Brennan O, Mauer P, O'Brien FJ, Rackard SM, Taylor D and Lee TC, The behaviour of fatigue induced microdamage in compact bone samples from control and ovariectomised sheep. , Studies in Health Technology and Informatics , 133, 2008, p148 - 155Journal Article, 2008
• Taylor D, Bone as a structural material: how good is it? , Studies in Health Technology and Informatics , 133, 2008, p221 - 229Journal Article, 2008
• Taylor D and Kasiri S, A comparison of critical distance methods for fracture prediction, International Journal of Mechanical Sciences, 50, 2008, p1075 - 1081Journal Article, 2008
• Susmel S, Taylor D and Tovo R , On the estimation of notch fatigue limits by using the theory of the critical distances: L, ao and open notches, Structural Durability and Health Monitoring , 4, 2008, p1 - 18Journal Article, 2008
• Susmel L and Taylor D, On the use of the Theory of Critical Distances to predict static failures in ductile metallic materials containing different geometrical features, Engineering Fracture Mechanics, 75, 2008, p4410 - 4421Journal Article, 2008
• Taylor D, Theoretical Modelling in Bioengineering, Irish Journal of Medical Science, 177, 2008, p1 - 18Journal Article, 2008
• Kennedy, OD, Brennan, O, Rackard, SM, O'Brien, FJ, Taylor, D, Lee, TC, Variation of trabecular microarchitectural parameters in cranial, caudal and mid-vertebral regions of the ovine L3 vertebra., Journal of Anatomy, 214, (5), 2009, p729 - 735Journal Article, 2009, DOI , URL
• Lee, T.C., O'Brien, F.J., Gunnlaugsson, T., Parkesh, R., Taylor, D., Microdamage and bone mechanobiology , Technology and Health Care, 14, (4-5), 2006, p359-365Journal Article, 2006
• Susmel, L., Taylor, D., The Theory of Critical Distances to estimate the static strength of notched samples of Al6082 loaded in combined tension and torsion. Part II: Multiaxial static assessment , Engineering Fracture Mechanics, 77, (3), 2010, p470-478Journal Article, 2010, DOI
• Susmel, L., Taylor, D., The Theory of Critical Distances to estimate the static strength of notched samples of Al6082 loaded in combined tension and torsion. Part I: Material cracking behaviour , Engineering Fracture Mechanics, 77, (3), 2010, p452-469Journal Article, 2010, DOI
• Hoey D and Taylor D, Comparison of the fatigue behaviour of two different forms of PMMA, Fatigue and Fracture of Engineering Materials and Structures, 32, 2009, p261 - 269Journal Article, 2009, DOI
• Susmel L and Taylor D, On the use of the theory of critical distances to estimate KIC and "Kth from experimental results generate by testing standard notches, Key Engineering Materials, 417-418, 2010, p25 - 28Journal Article, 2010, DOI
• Taylor D, Kasiri S and Brazel E, The theory of critical distances applied to problems in fracture and fatigue of bone, Frattura ed Integrita Strutturale, 10, 2009, p12 - 20Journal Article, 2009
• Hazenberg JG, Hentunen TA, Heino TJ, Kurata K, Lee TC and Taylor D., Microdamage detection and repair in bone: fracture mechanics, histology, cell biology., Technology and Health Care, 17, 2009, p67 - 75Journal Article, 2009, DOI
• Edwards WB, Taylor D, Rudolphi TJ, Gillette JC and Derrick TR , Effects of stride length and running mileage on a probabilistic stress fracture model, Medicine and Science in Sports and Exercise, 41, 2009, p2177 - 2184Journal Article, 2009, DOI
• Hoey D and Taylor D, Statistical distribution of the fatigue strength of porous bone cement. , Biomaterials, 30, 2009, p6309 - 6317Journal Article, 2009, DOI
• Santus C and Taylor D, Physically short crack propagation in metals during high cycle fatigue, International Journal of Fatigue, 31, 2009, p1356 - 1365Journal Article, 2009, DOI
• Carpinteri, A, Cornetti, P, Pugno N, Sapora A and Taylor, D, Generalised fracture toughness for specimens with reentrant corners: experiments vs theoretical predictions. , Structural Engineering and Mechanics, 32, 2009, p609 - 620Journal Article, 2009
• Brazel E and Taylor D, Predicting the structural integrity of bone defects repaired using bone graft materials. , Computer methods in biomechanics and biomedical engineering , 12, 2009, p297 - 304Journal Article, 2009, DOI
• Taylor D, ) On the application of the Theory of Critical Distances for the prediction of fracture in fibre composites, Frattura et Integrita Strutturale, 11, 2009, p3 - 9Journal Article, 2009
• Cornetti P, Taylor D and Carpinteri A, An asymptotic matching approach to shallow notched structural elements, Engineering Fracture Mechanics, 77, 2010, p348 - 358Journal Article, 2010, DOI
• Taylor D, Why are your bones not made of steel?, Materials Today, 13, (3), 2010, p6 - 7Journal Article, 2010, DOI
• Luca Susmel and David Taylor, The Theory of Critical Distances as an alternative experimental strategy for the determination of KIc and ΔKth, Engineering Fracture Mechanics, 77, (9), 2010, p1492-1501Journal Article, 2010, DOI , URL , TARA - Full Text
• David Taylor, Applications of the Theory of Critical Distances in Failure Analysis, Engineering Failure Analysis, 18, (2), 2010, p543-549Journal Article, 2010, DOI , URL , TARA - Full Text
• Lauren E. Mulcahy, David Taylor, T. Clive Lee and Garry P. Duffy, RANKL and OPG activity is regulated by injury size in networks of osteocyte-like cells, Bone, 48, (2), 2011, p182-188Journal Article, 2011, DOI , URL , TARA - Full Text
• Kasiri, S., Kelly, D.J. Taylor, D. , Can The Theory of Critical Distances Predict the Failure of Shape Memory Alloys?, Computer Methods in Biomechanics and Biomedical Engineering , 14, (6), 2011, p491-496Journal Article, 2011, DOI
• Simone Capetta, Roberto Tovo, David Taylor and Paolo Livieri, Numerical Evaluation of Fatigue Strength on Mechanical Notched Components under Multiaxial Loadings, International Journal of Fatigue, 33, (5), 2011, p661-671Journal Article, 2011, DOI , URL , TARA - Full Text
• David Taylor, What we can't learn from nature, Materials Science and Engineering: C, 31, (6), 2011, p1160-1163Journal Article, 2011, DOI , URL , TARA - Full Text
• David Taylor, Andrew Kelly, Matteo Toso, Luca Susmel, The Variable Radius Notch: Two New Methods for Reducing Stress Concentration, Engineering Failure Analysis, 18, (3), 2011, p1009-1017Journal Article, 2011, DOI , URL , TARA - Full Text
• Luca Susmel, David Taylor, The Theory of Critical Distances to estimate lifetime of notched components subjected to variable amplitude uniaxial fatigue loading, International Journal of Fatigue, 33, (7), 2011, p900-911Journal Article, 2011, DOI , URL , TARA - Full Text
• L. Susmel, B. Atzori, G. Meneghetti, D. Taylor, Notch and Mean Stress Effect in Fatigue as Phenomena of Elasto-Plastic Inherent Multiaxiality, Engineering Fracture Mechanics, 78, (8), 2011, p1628-1643Journal Article, 2011, DOI , URL , TARA - Full Text
• MOHOLKAR, K, TAYLOR, D, OREAGAN, M, FENELON, G, A BIOMECHANICAL ANALYSIS OF FOUR DIFFERENT METHODS OF HARVESTING BONE-PATELLAR TENDON-BONE GRAFT IN PORCINE KNEES, JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME, 84A, 2002, p1782 - 1787Journal Article, 2002
• TAYLOR, D, A MECHANISTIC APPROACH TO CRITICAL-DISTANCE METHODS IN NOTCH FATIGUE, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 24, 2001, p215 - 224Journal Article, 2001
• TAYLOR, D, PRENDERGAST, PJ, A MODEL FOR FATIGUE CRACK PROPAGATION AND REMODELLING IN COMPACT BONE, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 211, 1997, p369 - 375Journal Article, 1997
• BRAID, JEM, TAYLOR, D, KNOTT, JF, A MODEL FOR FATIGUE THRESHOLDS AT HIGH R RATIOS, CANADIAN METALLURGICAL QUARTERLY, 26, 1987, p161 - 165Journal Article, 1987
• TAYLOR, D, OBRIEN, F, LEE, TC, A THEORETICAL MODEL FOR THE SIMULATION OF MICRODAMAGE ACCUMULATION AND REPAIR IN COMPACT BONE, MECCANICA, 37, 2002, p397 - 406Journal Article, 2002
• OBRIEN, FJ, TAYLOR, D, LEE, TC, AN IMPROVED LABELLING TECHNIQUE FOR MONITORING MICROCRACK GROWTH IN COMPACT BONE, JOURNAL OF BIOMECHANICS, 35, 2002, p523 - 526Journal Article, 2002
• TAYLOR, D, BONE MAINTENANCE AND REMODELING: A CONTROL SYSTEM BASED ON FATIGUE DAMAGE, JOURNAL OF ORTHOPAEDIC RESEARCH, 15, 1997, p601 - 606Journal Article, 1997
• TAYLOR, D, OBRIEN, F, PRINA-MELLO, A, RYAN, C, OREILLY, P, LEE, TC, COMPRESSION DATA ON BOVINE BONE CONFIRMS THAT A "STRESSED VOLUME" PRINCIPLE EXPLAINS THE VARIABILITY OF FATIGUE STRENGTH RESULTS, JOURNAL OF BIOMECHANICS, 32, 1999, p1199 - 1203Journal Article, 1999
• TAYLOR, D, CRACK MODELLING: A NOVEL TECHNIQUE FOR THE PREDICTION OF FATIGUE FAILURE IN THE PRESENCE OF STRESS CONCENTRATIONS, COMPUTATIONAL MECHANICS, 20, 1997, p176 - 180Journal Article, 1997
• TAYLOR, D, CRACK MODELLING: A TECHNIQUE FOR THE FATIGUE DESIGN OF COMPONENTS, ENGINEERING FAILURE ANALYSIS, 3, 1996, p129 - 136Journal Article, 1996
• PRENDERGAST, PJ, MURPHY, BP, TAYLOR, D, DISCARDING SPECIMENS FOR FATIGUE TESTING OF ORTHOPAEDIC BONE CEMENT: A COMMENT ON CRISTOFOLINI ET AL. (2000) - FATIGUE FRACT. ENGNG. MATER. STRUCT. 23, 953-957, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 25, 2002, 315 - 316Miscellaneous, 2002
• DOLAN, F, TAYLOR, D, BLACKIE, PA, EMPIRICAL MODELING OF THE TENSILE PROPERTIES OF HIGH-IMPACT POLYSTYRENE IN TERMS OF ITS SECONDARY PHASE MORPHOLOGY, KEY ENGINEERING MATERIALS, 99-1, 1995, p79 - 84Journal Article, 1995
• MCNAMARA, BP, CRISTOFOLINI, L, TONI, A, TAYLOR, D, EVALUATION OF EXPERIMENTAL AND FINITE-ELEMENT MODELS OF SYNTHETIC AND CADAVERIC FEMORA FOR PRECLINICAL DESIGN-ANALYSIS, CLINICAL MATERIALS, 17, 1995, p131 - 140Journal Article, 1995
• SYED, AA, KENNEDY, JG, MULLET, H, OFLANAGAN, J, TAYLOR, D, FATIGUE FAILURE OF AN AO SPIRAL BLADE, ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY, 120, 2000, p366 - 368Journal Article, 2000
• TAYLOR, D, FATIGUE OF BONE AND BONES: AN ANALYSIS BASED ON STRESSED VOLUME, JOURNAL OF ORTHOPAEDIC RESEARCH, 16, 1998, p163 - 169Journal Article, 1998
• TAYLOR, D, FATIGUE THRESHOLDS - THEIR APPLICABILITY TO ENGINEERING SITUATIONS, INTERNATIONAL JOURNAL OF FATIGUE, 10, 1988, p67 - 79Review, 1988
• TAYLOR, D, GEOMETRICAL EFFECTS IN FATIGUE: A UNIFYING THEORETICAL MODEL, INTERNATIONAL JOURNAL OF FATIGUE, 21, 1999, p413 - 420Journal Article, 1999
• TAYLOR, D, LEE, TC, MEASURING THE SHAPE AND SIZE OF MICROCRACKS IN BONE, JOURNAL OF BIOMECHANICS, 31, 1999, p1177 - 1180Journal Article, 1999
• TAYLOR, D, MICROCRACK GROWTH PARAMETERS FOR COMPACT BONE DEDUCED FROM STIFFNESS VARIATIONS, JOURNAL OF BIOMECHANICS, 31, 1998, p587 - 592Journal Article, 1998
• TAYLOR, D, ZHOU, W, CIEPALOWICZ, AJ, DEVLUKIA, J, MIXED-MODE FATIGUE FROM STRESS CONCENTRATIONS: AN APPROACH BASED ON EQUIVALENT STRESS INTENSITY, INTERNATIONAL JOURNAL OF FATIGUE, 21, 1999, p173 - 178Journal Article, 1999
• TAYLOR, D, MODELLING OF FATIGUE CRACK GROWTH AT THE MICROSTRUCTURAL LEVEL, COMPUTATIONAL MATERIALS SCIENCE, 25, 2002, p228 - 236Journal Article, 2002
• TAYLOR, D, HUGHES, M, ALLEN, D, NOTCH FATIGUE BEHAVIOUR IN CAST IRONS EXPLAINED USING A FRACTURE MECHANICS APPROACH, INTERNATIONAL JOURNAL OF FATIGUE, 18, 1996, p439 - 445Journal Article, 1996
• ODONNELL, MP, HURST, RC, TAYLOR, D, OBSERVATIONS OF THE MICROMECHANISMS AFFECTING THE FRACTURE PATH FOR THERMAL FATIGUE-CREEP LOADING OF A 316L STAINLESS STEEL, MATERIALS AT HIGH TEMPERATURES, 15, 1998, p95 - 98Journal Article, 1998
• TAYLOR, D, ON THE USE OF P-A PLOTS TO MODEL THE BEHAVIOR OF SHORT FATIGUE CRACKS, INTERNATIONAL JOURNAL OF FATIGUE, 14, 1992, p163 - 168Journal Article, 1992
• ZHANG, Y, TAYLOR, D, OPTIMIZATION OF SPOT-WELDED STRUCTURES, FINITE ELEMENTS IN ANALYSIS AND DESIGN, 37, 2001, p1013 - 1022Journal Article, 2001
• MCNAMARA, BP, PRENDERGAST, PJ, TAYLOR, D, PREDICTION OF BONE ADAPTATION IN THE ULNAR-OSTEOTOMIZED SHEEPS FORELIMB USING AN ANATOMICAL FINITE-ELEMENT MODEL, JOURNAL OF BIOMEDICAL ENGINEERING, 14, 1992, p209 - 216Journal Article, 1992
• PRENDERGAST, PJ, TAYLOR, D, PREDICTION OF BONE ADAPTATION USING DAMAGE ACCUMULATION, JOURNAL OF BIOMECHANICS, 27, 1994, p1067 - 1076Journal Article, 1994
• TAYLOR, D, LAWLESS, S, PREDICTION OF FATIGUE BEHAVIOUR IN STRESS-CONCENTRATORS OF ARBITRARY GEOMETRY, ENGINEERING FRACTURE MECHANICS, 53, 1996, p929 - 939Journal Article, 1996
• WANG, G, TAYLOR, D, BOUQUIN, B, DEVLUKIA, J, CIEPALOWICZ, A, PREDICTION OF FATIGUE FAILURE IN A CAMSHAFT USING THE CRACK MODELLING METHOD, ENGINEERING FAILURE ANALYSIS, 7, 2000, p189 - 197Journal Article, 2000
• TAYLOR, D, CIEPALOWICZ, AJ, ROGERS, P, DEVLUKIA, J, PREDICTION OF FATIGUE FAILURE IN A CRANKSHAFT USING THE TECHNIQUE OF CRACK MODELLING, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 20, 1997, p13 - 21Journal Article, 1997
• TAYLOR, D, BOLOGNA, P, KNANI, KB, PREDICTION OF FATIGUE FAILURE LOCATION ON A COMPONENT USING A CRITICAL DISTANCE METHOD, INTERNATIONAL JOURNAL OF FATIGUE, 22, 2000, p735 - 742Journal Article, 2000
• WILSON, SP, TAYLOR, D, RELIABILITY ASSESSMENT FROM FATIGUE MICRO-CRACK DATA, IEEE TRANSACTIONS ON RELIABILITY, 46, 1997, p165 - 172Journal Article, 1997
• TAYLOR, D, SCALING EFFECTS IN THE FATIGUE STRENGTH OF BONES FROM DIFFERENT ANIMALS, JOURNAL OF THEORETICAL BIOLOGY, 206, 2000, p299 - 306Journal Article, 2000
• ZHANG, Y, TAYLOR, D, SHEET THICKNESS EFFECT OF SPOT WELDS BASED ON CRACK PROPAGATION, ENGINEERING FRACTURE MECHANICS, 67, 2000, p55 - 63Journal Article, 2000
• TAYLOR, D, LI, J, GIESE, A, SHORT FATIGUE-CRACK GROWTH IN CAST-IRON DESCRIBED USING P-A CURVES, INTERNATIONAL JOURNAL OF FATIGUE, 17, 1995, p201 - 206Journal Article, 1995
• TAYLOR, D, BARRETT, N, LUCANO, G, SOME NEW METHODS FOR PREDICTING FATIGUE IN WELDED JOINTS, INTERNATIONAL JOURNAL OF FATIGUE, 24, 2002, p509 - 518Journal Article, 2002
• TAYLOR, D, SPECIAL ISSUE ON FATIGUE OF BIOMATERIALS, INTERNATIONAL JOURNAL OF FATIGUE, 22, 2000, III - IIIMiscellaneous, 2000
• WILSON, SP, TAYLOR, D, STATISTICAL ANALYSIS AND RELIABILITY PREDICTION WITH SHORT FATIGUE CRACK DATA, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 22, 1999, p67 - 76Journal Article, 1999
• PRENDERGAST, PJ, TAYLOR, D, STRESS-ANALYSIS OF THE PROXIMOMEDIAL FEMUR AFTER TOTAL HIP-REPLACEMENT, JOURNAL OF BIOMEDICAL ENGINEERING, 12, 1990, p379 - 382Journal Article, 1990
• TAYLOR, D, CARR, AJ, THE CRACK-MODELLING TECHNIQUE: OPTIMIZATION OF PARAMETERS, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 22, 1999, p41 - 50Journal Article, 1999
• TAYLOR, D, THE EFFECT OF CRACK LENGTH ON FATIGUE THRESHOLD, FATIGUE OF ENGINEERING MATERIALS AND STRUCTURES, 7, 1985, p267 - 277Journal Article, 1985
• BROWN, CW, THE EFFECTS OF TEXTURE AND GRAIN-SIZE ON THE SHORT FATIGUE CRACK-GROWTH RATES IN TI-6AL-4V, unknown, 1983, 35, ISI Web of Science, 1983, ppA14 - A15Meeting Abstract, 1983
• TAYLOR, D, CLANCY, OM, THE FATIGUE PERFORMANCE OF MACHINED SURFACES, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 14, 1991, p329 - 336Journal Article, 1991
• TAYLOR, D, LEE, TC, THE FORMATION OF A BIOENGINEERING SECTION OF THE ROYAL-ACADEMY-OF-MEDICINE IN IRELAND, IRISH JOURNAL OF MEDICAL SCIENCE, 163, 1994, p447 - 447Journal Article, 1994
• TAYLOR, D, THE MEASUREMENT OF NEAR-THRESHOLD FATIGUE CRACK-GROWTH, ENGINEERING FRACTURE MECHANICS, 32, 1989, p177 - 181Journal Article, 1989
• LEE, TC, OBRIEN, FJ, TAYLOR, D, THE NATURE OF FATIGUE DAMAGE IN BONE, INTERNATIONAL JOURNAL OF FATIGUE, 22, 2000, p847 - 853Journal Article, 2000
• TAYLOR, D, KUIPER, JH, THE PREDICTION OF STRESS FRACTURES USING A 'STRESSED VOLUME' CONCEPT, JOURNAL OF ORTHOPAEDIC RESEARCH, 19, 2001, p919 - 926Journal Article, 2001
• TAYLOR, D, WANG, G, THE VALIDATION OF SOME METHODS OF NOTCH FATIGUE ANALYSIS, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 23, 2000, p387 - 394Journal Article, 2000
• GILCHRIST, M, TAYLOR, D, BROBERG, B, UNTITLED, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 22, 1999, 1 - 1Miscellaneous, 1999
• OBRIEN, FJ, TAYLOR, D, DICKSON, GR, LEE, TC, VISUALISATION OF THREE-DIMENSIONAL MICROCRACKS IN COMPACT BONE, JOURNAL OF ANATOMY, 197, 2000, p413 - 420Journal Article, 2000
• TAYLOR, D, STANIASZEK, IAN, KNOTT, JF, WHEN IS A CRACK NOT A CRACK - SOME DATA ON THE FATIGUE BEHAVIOR OF CRACKS AND SHARP NOTCHES, INTERNATIONAL JOURNAL OF FATIGUE, 12, 1991, p397 - 402Journal Article, 1991
• Taylor, D., Compendium of Fatigue Thresholds and Growth Rates, UK, EMAS, 1984, 380ppBook, 1984
• Taylor, D., Fatigue Thresholds, UK, Butterworths, 1989, 220ppBook, 1989
• Taylor, D. and Li, J., Sourcebook on Fatigue Crack Propagation: Thresholds and Crack Closure, UK, EMAS, 1993, 310ppBook, 1993
• Taylor, D. and Knott, J.F., Fatigue Crack Propagation Behaviour of Short Cracks: The Effect of Microstructure, Fatigue of Engineering Materials and Structures, 4, 1981, p147Journal Article, 1981
• Taylor, D. and Knott, J.F., Growth of Fatigue Cracks from Casting Defects, Nickel-Aluminium Bronze Metals Technology, 9, 1982, p221Journal Article, 1982
• Taylor, D., Euromech Colloquium on Short Fatigue Cracks, Fatigue of Engineering Materials and Structures, 5, 1982, p305Journal Article, 1982
• Taylor, D., The Effect of Crack Length on Fatigue Thresholds, Fatigue of Engineering Materials and Structures, 7, 1984, p267Journal Article, 1984
• Clancy, O., Ponsonby, J., McCarthy, L. and Taylor, D., Fatigue Behaviour of Shot-Peened Surfaces, Surface Engineering, 3, 1987, p64Journal Article, 1987
• Taylor, D., Moalic, J-M, Clarke, F.M., McCormack, B. and Sheehan, J., Fibre Reinforcement of Bone Cement, Engineering in Medicine, 17, 1988, p31Journal Article, 1988
• Hoey D and Taylor D, The effect of mixing technique on fatigue of bone cement when stress concentrations are present., International Journal of Nano and Biomaterials, 3, 2010, p36 - 48Journal Article, 2010, DOI
• Taylor, D., Fibre Reinforcement of Bone Cements, J.Biomed.Polymers, 4, 1988, p1Journal Article, 1988
• Edwards, WB, Taylor D, Rudolphi TJ, Gillette JC and Derrick TR , Effects of running speed on a probabilistic stress fracture model. , Clinical Biomechanics, 25, 2010, p372 - 377Journal Article, 2010, DOI
• Kasiri S, Reilly G and Taylor D , Wedge indentation fracture of cortical bone: experimental data and predictions, Journal of Biomechanical Engineering , 132, 2010, p1 - 6Journal Article, 2010, DOI
• Taylor D, Some of nature's little tricks, Materials Today, 13, 2010, p6 - 7Journal Article, 2010
• Susmel L and Taylor D, An elastoplastic reformulation of the Theory of Critical Distances to estimate lifetime of notched components failing in the low/medium cycle fatigue regime, Journal of Engineering Materials and Technology (Trans ASME), 132, 2010, p0210021 - 0210028Journal Article, 2010, DOI
• Taylor D, Inside or outside: where to put the skeleton?, Materials Today, 14, 2011, p62 - 63Journal Article, 2011
• Taylor, D., Clarke, F.M., McCormack, B. and Sheehan, J., Reinforcement of Bone Cement using Metal Meshes, Engineering in Medicine, Proc.I.Mech.E Part H, 203, 1989Journal Article, 1989
• Macey, A., McManus, F. and Taylor, D., Sub-capital Fracture in a Femoral Prosthesis: Brief Report, Engineering in Medicine, Proc.I.Mech.E Part H, 203, 1989Journal Article, 1989
• Prendergast, P., Monaghan, J. and Taylor, D., Materials Selection in the Artificial Hip Joint Using Finite Element Analysis, Clinical Materials, 4, 1989, p361Journal Article, 1989
• Prendergast, P.J., Lee, T.C. and Taylor, D., Theoretical Prediction of Bone Remodelling using a Damage Stimulus, Journal of Anatomy (Anat.Soc.Great Britain and Ireland), 179, 1991, p218Journal Article, 1991
• Prendergast, P.J. and Taylor, D., The design of intramedullary prostheses to prevent bone loss: predictions based on damage-stimulated remodelling, J.Biomedical Engineering, 14, 1992, p499 - 505Journal Article, 1992
• Taylor, D., The definition and measurement of crack closure, Engineering Fracture Mechanics, 43, 1992, p109 - 115Journal Article, 1992
• Culleton, T., Prendergast, P.J. and Taylor, D., Fatigue failure in the cement mantle of an artificial hip joint, Clinical Materials, 12, 1993, p95 - 102Journal Article, 1993
• Taylor, D., Martin, C., Cornelis, B. and Jones, M.E.B., An isoelastic prosthesis using a new composite material, J.Eng.in Medicine (Proc.I.Mech.E.), 1993, p121 - 125Journal Article, 1993
• Brady, C., Taylor, D. and O'Brien, M., Whiplash and Temporomandibular Joint Dysfunction, J.Irish Dental Association, 39, 1993, p69 - 72Journal Article, 1993
• Taylor, D. and O'Donnell, M., Notch Geometry Effects in Fatigue, a Conservative Design Approach, Journal of Engineering Failure Analysis, 1, 1995, p275 - 287Journal Article, 1995
• McNamara, B.P., Toni, A. and Taylor, D., Effects of Implant Material Properties and Implany-Bone Bonding on Stress-Shielding in Cementless Total Hip Arthroplasty, Key Engineering Materials, 99-100, 1995, p309 - 314Journal Article, 1995
• Taylor D. and Prendergast, PJ., Damage accumulation in compact bone - a fracture mechanics approach to estimate damage and repair rates, Advances in Bioengineering BED- (Publ.ASME-USA), 13, 1995, p337 - 338Journal Article, 1995
• Taylor, D., Bone maintenance and remodelling: a control system based on fatigue damage, J.Orthop.Res., 15, 1997, p601 - 606Journal Article, 1997
• McNamara BP, Cristofolini L, Toni A and Taylor D., Relationship between bone-prosthesis bonding and load transfer in total hip reconstruction, J.Biomechanics, 30, 1997, p621 - 630Journal Article, 1997
• McNamara BP, Taylor D and Prendergast PJ., Computer prediction of adaptive bone remodelling around noncemented femoral prostheses: the relationship between damage-based and strain-based algorithms, Med.Eng.Phys., 19, 1997, p454 - 463Journal Article, 1997
• Looney L, Hurst RC and Taylor D., The effect of high pressure hydrogen on creep fracture of notched ferritic steel components, J.Materials Processing Technology, 77, 1998, p25 - 31Journal Article, 1998
• Lee TC and Taylor D., Bone remodelling: should we cry Wolff?, Irish Journal of Medical Science, 168, 1999, p102 - 105Journal Article, 1999
• Taylor D, Falsetti F, O'Brien F, O'Reilly P, Banville E, Lee TC., A fatigue-based model of disuse osteoporosis, Computer Methods in Biomechanics and Biomedical Engineering, 4, 2001, p413 - 420Journal Article, 2001
• O'Brien FJ, Taylor D and Lee TC, Microcrack accumulation during fatigue testing of compact bone, Technology and Health Care, 9, 2001, p118 - 119Journal Article, 2001
• Taylor, D., Fatigue of Biological Structures and Biomaterials, Encyclopedia of Materials: Science and Technology, 2001Journal Article, 2001
• O'Brien FJ, Taylor D and Lee TC., An improved labelling technique for monitoring microcrack growth in compact bone, 35, 2002, p523 - 526Journal Article, 2002
• Lee TC, Staines A and Taylor D, Bone adaptation to load: microdamage as a stimulus for bone remodelling, J Anat 201, 2002, p437 - 446Journal Article, 2002
• Taylor D and Lee TC, A crack growth model for the simulation of fatigue in bone, Int.J.Fatigue, 25, 2003, p387 - 396Journal Article, 2003
• Taylor D, How does bone break?, Nature Materials, 2, 2003, p133 - 134Journal Article, 2003
• O'Brien FJ, Taylor D and Lee TC., Microcrack accumulation at different intervals during fatigue testing of compact bone, J.Biomech., 36/7, 2003, p973 - 980Journal Article, 2003
• Taylor D, Hazenberg J.G. and Lee TC, The Cellular Transducer in Damage-Stimulated Bone Remodelling: A Theoretical Investigation Using Fracture Mechanics, Journal of Theoretical Biology, 225, 2003, p65 - 75Journal Article, 2003
• Taylor D and Lee TC, Microdamage and mechanical behaviour: predicting failure and remodeling in compact bone, Journal of Anatomy, 203, 2003, p203 - 211Journal Article, 2003
• Lee TC, Mohsin S, Taylor D, Parkesh R, Gunnlaugsson T, O'Brien FJ, Giehl M and Gowin W, Detecting microdamage in bone, J.Anatomy, 203, 2003, p161 - 172Journal Article, 2003
• Taylor D, O'Reilly P, Vallet L and Lee TC, The fatigue strength of compact bone in torsion, J.Biomechanics, 36, 2003, p1103 - 1109Journal Article, 2003
• Susmel L., Taylor D., Fatigue Design in the Presence of Stress Concentrations, Int. J. of Strain Analysis, 38, (5), 2003, p443 - 452Journal Article, 2003
• Susmel L., Taylor D, Two methods for predicting the multiaxial fatigue limits of sharp notches, Fatigue Fract. Engng. Mater. Struct., 26, 2003, p821 - 833Journal Article, 2003
• Mohsin S, Taylor D and Lee TC, Three-dimensional reconstruction of Haversian systems in ovine compact bone, European Journal of Morphology, 40, 2003, p309 - 316Journal Article, 2003
• Taylor D., Predicting the fracture strength of ceramic materials using the theory of critical distances, Engng Fract Mech, 71, 2004, p2407 - 2416Journal Article, 2004
• Crupi V and Taylor D, Fatigue assessment of welded joints using, Engng Failure Anal, 2004Journal Article, 2004
• Lee TC and Taylor D, Quantification of ovine bone adaptation to altered load: morphometry, density and surface strain, Europ.J.Morphology, 2004Journal Article, 2004
• Taylor D, Casolari E and Bignardi C, Predicting stress fractures using a probabilistic model of damage, repair and adaptation, Journal of Orthopaedic Research, 22, 2004, p487 - 494Journal Article, 2004
• Taylor D, Merlo M, Pegley R and Cavatorta M.P., The effect of stress concentrations on the fracture strength of polymethylmethacrylate, Materials Science and Engineering A, 382, 2004, p288 - 294Journal Article, 2004
• Taylor D, Tilmans, S, Stress intensity variations in bone microcracks during the repair process, J.Theor Biol , 229, 2004, p169 - 177Journal Article, 2004
• Taylor, D., "A Model for the Estimation of Fatigue Crack Threshold Stress Intensities in Materials with Various Different Microstructures", Fatigue Thresholds, 1982Conference Paper, 1982
• Taylor, D., "An Analysis of Data on Fatigue Crack Propagation Thresholds", Fatigue, 84, EMAS (UK), 1985, pp327 - 327Conference Paper, 1985
• Taylor D, "Fatigue of Short Cracks; the Limitations of Fracture Mechanics", The Behaviour of Short Fatigue Cracks (EGF1), MEP (UK), 1986, pp479 - 479Conference Paper, 1986
• McCurtin, C., Taplin, D.M.R., Taylor, D. and Taylor, N.G., "The Effect of Multiaxial Stress States on Creep and Fracture of Alloy 800H", High Temperature Alloys, Liege, Oct.6-9, paper III, (1.6), 1986Conference Paper, 1986
• Taylor, D., "Fatigue Failure in Bone Cements for Hip Joint Implants", Fatigue, 87, EMAS (UK), 1988, pp1353 - 1353Conference Paper, 1988
• Taylor, D. and Moalic, J-M., "Fatigue Behaviour of Carbon Fibre Reinforced Bone Cement", Proc.I.Mech.E. conference on Engineering in Orthopaedics, 1989, pp33 - 33Conference Paper, 1989
• Taylor, D. and Delestre, C., "The Use of Textiles for the Reinforcement of Bone Cement", Proc.TIMS, Textiles in Medicine and Surgery, UMIST, Manchester, UK, 1989, pp1 - 1Conference Paper, 1989
• Taylor, D., "Fatigue of Biomaterials", Fatigue, 90, MCEP (UK), 1991, pp55 - 64Conference Paper, 1991
• Taylor, D., Prendergast, P. and McArdle, J.V., "Fatigue in the Artificial Hip Joint: Improvements Through Fibre Reinforcement of Bone Cement", Fatigue, 90, Publ.MCEP (UK), 1991, pp827 - 827Conference Paper, 1991
• Greenfield, Allen, D., Byrne, P. and Taylor, D., "Surface Roughness Effects on Fatigue: A Fracture Mechanics Approach", Fatigue, 90, MCEP (UK), 1991, pp391 - 391Conference Paper, 1991
• Taylor, D., Crack-like notches and notch-like cracks, Proc. ECF-8, Turin, October 1990, 1990Conference Paper, 1990
• Prendergast. P.J., McCormack, B., Gunawardhana, T. and Taylor, D., "The Effect of Prosthesis Orientation on Stress Shielding using Finite Element Analysis - Indications as to Bone Remodelling", Interfaces in Medicine and Mechanics, edited by Williams et al , 2, Elsevier, 1991, pp329 - 329Conference Paper, 1991
• Martin, C., Cornelis, B., Jones, M.E.B. and Taylor, D., "Manufacture of an Artificial Hip Joint Using a Composite Material", Flow Processes in Composite Materials, Univ. of Limerick, 1991Conference Paper, 1991
• Prendergast, P.J., McNamara, B.P. and Taylor, D., "Prediction of bone adaptation based on accumulative damage and repair: finite element simulations", Computer Methods in Biomechanics and Biomedical Engineering, Swansea, UK, Books and Journals International Ltd, 1992, pp40 - 49Conference Paper, 1992
• Prendergast, P.J., Reid, A.J., Corrigan, J. and Taylor, D., "Structural analysis of a half-pin bilateral external fixator", 39th Annual Meeting Orthopaedic Research Society (ORS), 1993Conference Paper, 1993
• Taylor, D. and O'Donnell, M., "Notch Effects in High Cycle Fatigue: A Simple, Unified Approach", Fatigue, 93, EMAS(UK), 1994, pp459 - 464Conference Paper, 1994
• Taylor, D., Prendergast, P. and McNamara, B., "Fatigue and Repair Processes in Human Bone", Fatigue, 93, EMAS(UK), 1994, pp1435 - 1440Conference Paper, 1994
• McNamara, B.P., Prendergast, P.J., Toni, A. and Taylor, D., A computer simulation of bone adaptation in response to an accumulative damage stimulus, BOAFE1-10,13., 4th Int.Symp.on Computer Simulation in Biomechanics, Paris, July 1993, 1993Conference Paper, 1993
• Prendergast, P.J., Toland, S.J., Reid, A.J., Corrigan, J. and Taylor, D., "A study of external fixator design concepts by finite element analysis and mechanical testing", Transactions of the European Orthopaedic Research Society, 4, 1994, pp26 - 26Conference Paper, 1994
• Taylor, D., "Damage Accumulation and Failure Prediction at Stress Singularities", 2nd World Cong.Biomechanics, Amsterdam, 1994Conference Paper, 1994
• McNamara, B.P., Cristofolini, L., Toni, A., Taylor, D. and Giunti, A., Stress shielding predicted using a composite material femur,, Proc.2nd World Congress of Biomechanics, Amsterdam, 1, 1994, pp101 - 101Conference Paper, 1994
• Toni, A., McNamara, B.P., Sudanese, A., Baruffaldi, F., Calista, F., Taylor, D. and Giunti, A., Bone remodelling after total hip arthroplasty, 2, Proc.2nd World Congress of Biomechanics, Amsterdam, 1994, pp37 - 37Conference Paper, 1994
• Lee TC, Mulville JP, Prendergast PJ and Taylor D, A model for the study of bone adaptation under altered load, Proc.2nd World Congress of Biomechanics, Amsterdam, 2, 1994, pp239 - 239Conference Paper, 1994
• McNamara, B.P., Cristofolini, L., Toni, A. and Taylor, D., Effects of bone-prosthesis interface bonding on stress shielding in cementless THA, ASME winter meeting, Chicago, 1994Conference Paper, 1994
• Looney, L., Hurst, RC. and Taylor, D., "The Behaviour of Notched Petro-Refinery Steel Components at High Temperature", ECF-10, Berlin, 1994Conference Paper, 1994
• Dolan, F. , Taylor, D. and Blackie, P.A., "Empirical modelling of rubber phase volume and particle size effects on monotonic tensile properties in high impact polystyrene", Polymat'94, London, 1994Conference Paper, 1994
• Dolan, F., Taylor, D. and Blackie, P.A., "A study of the influence of rubber particle size and rubber phase volume on fatigue behaviour in HIPS", Polymat'94, London, 1994Conference Paper, 1994
• McNamara, B.P., Toni, A. and Taylor, D., Experimental and Numerical Pre-clinical evaluation relating to total hip arthroplasty, 2nd Int.Conf. on Computer Methods in Biomechanics and Biomedical Engineering, Gordon and Breach (UK), 1996, pp1 - 10Conference Paper, 1996
• M.P.O'Donnell, R.C.Hurst and D.Taylor, "Analysis of crack growth in components under thermal fatigue/creep loading", High Temperature Creep and Fatigue, Inst.Mechanical Engineers London, 1996Conference Paper, 1996
• Looney, L., Hurst, R.C. and Taylor, D., The effect of high pressure hydrogen on the creep fracture of notched ferritic steel components, Proc.AMPT'95, 1995Conference Paper, 1995
• M.P.O'Donnell, R.C.Hurst and D.Taylor , Crack growth behaviour of components subjected to thermal fatigue/creep loading, FATIGUE 96, 1996Conference Paper, 1996
• Taylor, D., Prendergast, P.J. and McNamara, B.P., Fatigue in human bone: the importance of short-crack behaviour, Fatigue 96, Berlin, May 1996, 1996Conference Paper, 1996
• McNamara, B.P., Taylor, D. and Toni, A., "Clinical resorption after cementless THA predicted using a damage-adaptive remodelling rule", Proc. 42nd Annual Meeting, Orthopaedic Research Society, Atlanta Georgia, 1996Conference Paper, 1996
• McNamara, B.P. and Taylor, D., "Bone adaptation in the ulnar-osteotomised sheep's forelimb predicted using a damage-adaptive remodelling rule", 43rd annual meeting, Orthopaedic Reseach Society (ORS), 1997Conference Paper, 1997
• Sicot, N., Lemarinel, V., Berard, J.Y. and Taylor, D., "Fatigue behaviour of a unidirectional composite laminate in the vicinity of a notch", , ICFC conference, Paris , 1997, pp107 - 117Conference Paper, 1997
• O'Donnell MP, Hurst, RC and Taylor, D, "Observations of the micromechanisms affecting the fracture path for thermal fatigue-creep loading of a 316L stainless steel", Proc.Nuclear Engineering and Design, 1997, pp23 - 33Conference Paper, 1997
• Taylor D, Wang G, Devlukia J, Ciepalowicz A and Zhou W, The analysis of stress concentrations in components: a modified fracture-mechanics approach, "Modern Practice in Stress and Vibration Analysis", Rotterdam, edited by M.Gilchrist, Publ.A.A.Balkema , 1997, pp355 - 358Conference Paper, 1997
• Taylor, D., Crack modelling: an aid to optimisation through the analysis of stress concentrators, "Computer Aided Optimum Design of Structures", Southampton, UK, CMP, 1997, pp469 - 478Conference Paper, 1997
• O'Donnell, M.P., Hurst, R.C. and Taylor, D., Observations of the micromechanisms affecting the fracture path for thermal fatigue-creep loading of a 316L stainless steel, Creep and Fatigue Crack Growth in High Temperature Plant, Saclay, Paris France, 15-17 April 1998, 1998, ppS3 - 23Conference Paper, 1998
• Li Jianchun and Taylor D., A new model of short crack closure, ICF9, Pergamon, 1997, pp1443 - 1450Conference Paper, 1997
• Taylor D, "Damage and repair in compact bone: some thoughts on the shape of basic mineralisation units", Computer Methods in Biomechanics and Biomedical Engineering, UK, edited by Middleton, Jones and Pande , 2, Gordon and Breach, 1998, pp239 - 246Conference Paper, 1998
• Taylor D and Wang G, A critical distance approach which unifies the prediction of fatigue limits for large and small cracks and notches, Fatigue'99, China, June 1999, 1999, pp579 - 584Conference Paper, 1999
• Wang G, Taylor D, Ciepalowicz A and Devlukia J, Prediction of fatigue failure in cast aluminium alloy components using the crack modelling method, Fatigue'99, China, June 1999, 1999, pp735 - 740Conference Paper, 1999
• Taylor D, Fatigue in bone: predictions of adaptation, Fatigue'99, China, June 1999, 1999, pp1777 - 1782Conference Paper, 1999
• Zhang Y and Taylor D, Fatigue life prediction of spot-welded components, Fatigue'99, China, June 1999, 1999, pp1275 - 1280Conference Paper, 1999
• Taylor D, "Fatigue damage in bone: links to adaptation", "Synthesis in Bio Solid Mechanics", , IUTAM symp., Kluwer, 1999, pp175 - 186Conference Paper, 1999
• Lee TC, Noelke L, McMahon GT, Mulville JP and Taylor D, "Functional adaptation in bone", IUTAM symp., Kluwer, 1999, pp1 - 10Conference Paper, 1999
• Taylor D, "A modified fracture mechanics method for the prediction of fatigue failure from stress concentrations in engineering components", "Fatigue Design and Reliability" ESIS , Fatigue Design, edited by Marquis and Solin , 23, Elsevier, 1999, pp195 - 206Conference Paper, 1999
• Taylor D and Wang G, "Component design: the interface between threshold and endurance limit", ASTM STP 1372 , "Fatigue crack growth thresholds, endurance limits and design", edited by Newman, Piascik , ASTM, 1999, pp361 - 373Conference Paper, 1999
• D.Taylor and G.Wang, The Critical Volume Method in Fatigue Analysis, NATO Science Series II, "Notch Effects in Fatigue and Fracture", edited by Guy Pluvinage and Marenglen Gjonaj , 11, Kluwer (Dordrecht, The Netherlands), 2001, pp187 - 205Conference Paper, 2001
• O'Brien FJ, Taylor D, Lee TC., The process of microcrack growth in compact bone, Orthopaedic Research Society, Transactions of the 4th Combined Meeting of the Orthopaedic Research Societies of the USA, Europe, Canada and Japan, Chicago, edited by I Hvid, PS Nedza , 2001, pp150 - 150Conference Paper, 2001
• O'Brien F, Taylor D, Dickson G, Lee C., Visualization of three dimensional microcracks in human bone, Orthopaedic Research Society, Transactions of the 4th Combined Meeting of the Orthopaedic Research Societies of the USA, Europe, Canada and Japan, Chicago, edited by I Hvid, PS Nedza , 2001, pp217 - 217Conference Paper, 2001
• O'Brien FJ, Taylor D, Lee, TC, The process of microcrack growth in compact bone, American Society of Mechanical Engineers, Proceedings of the 2001 Bioengineering Conference (ISBN 0-791-1668-0), New York, edited by Kamm RD, Schmid-Schonbein GW, Ateshian GA, Hefzy MS , 40, BED, 2001, pp791 - 792Conference Paper, 2001
• Brien, F.J.; Taylor, D.; Brennan, O. and Lee, T.C., "The effect of bone microstructure on the initiation and growth of microcracks", 48th Annual Meeting of the Orthopaedic Research Society, Dallas, Texas, February, 2002, 2002, pp324 - 324Conference Paper, 2002
• Chaves-Repiso V and Taylor D., Use of 'simplified models' in fatigue prediction of real components, FATIGUE 2002: Proceedings of the Eight International Fatigue Congress, Birmingham UK, EMAS, 2002, pp2799 - 2806Conference Paper, 2002
• Susmel L and Taylor D., The point method and the modified Wohler curve criterion for the multiaxial fatigue assessment of notched components, FATIGUE 2002: Proceedings of the Eight International Fatigue Congress, Birmingham UK, EMAS, 2002, pp1889 - 1896Conference Paper, 2002
• Bellett D and Taylor D., The effect of crack shape on the fatigue assessment of three-dimensional stress concentrations, FATIGUE 2002: Proceedings of the Eight International Fatigue Congress, Birmingham UK, EMAS, 2002, pp2767 - 2774Conference Paper, 2002
• Crupi G, Crupi V, Guglielmino E and Taylor D, Fatigue assessment of welded joints by different approaches, FATIGUE 2002: Proceedings of the Eight International Fatigue Congress, Birmingham UK, EMAS, 2002, pp363 - 370Conference Paper, 2002
• Taylor D, Fatigue: Some novel applications of fracture mechanics concepts to the problem of stress concentrations, Associazione Italiana per l'Analisi delle Sollecitazioni (AIAS) XXXI Convegno Nazionale, Parma,Italy, AIAS, 2002, pp20 - 32Conference Paper, 2002
• G.Crupi, V.Crupi, E.Guglielmino and D.Taylor, Comportamento a fatica di giunti saldati in lega di alluminio., IGF2002, 2002Conference Paper, 2002
• V. Crupi, E. Guglielmino, A. Risitano, D. Taylor, "New approaches to assess the fatigue life of welded aluminium ship details", NAV 2003, International Conference on ship and shipping research, Palermo, 24-27 June 2003, 2003Conference Paper, 2003
• L. Susmel, D. Taylor, R. Tovo, Crack Paths in Sharply Notched Specimens under In-Phase Biaxial Loadings, FCP 2003, Parma, Italy, September 2003, 2003Conference Paper, 2003
• D.Taylor, F.O'Brien and TC Lee, Damage accumulation in bone: theory and practice, Compuer Methods in Biomechanics and Biomedical Engineering, Rome, November 2001, edited by Middleton and Jones , 4, 2003Conference Paper, 2003
• JG Hazenberg, FJ O'Brien, D.Taylor and TC Lee, Microcrack growth and shape development in cortical bone, Compuer Methods in Biomechanics and Biomedical Engineering, Rome, November 2001, edited by Middleton and Jones , 4, 2003Conference Paper, 2003
• S Mohsin, M Mercy, F.J.O'Brien, D Taylor and TC Lee, Computerised 3D reconstruction of Haversian systems during bone remodelling, Compuer Methods in Biomechanics and Biomedical Engineering, Rome, November 2001, edited by Middleton and Jones , 4, 2001Conference Paper, 2001
• Taylor D., Analysis of fatigue failure in components using the theory of critical distances., ICEFA-1 conference, Lisbon, July 2004, 2004, pp22 - 22Conference Paper, 2004
• Taylor, D., Applications of the theory of critical distances to the prediction of brittle fracture in metals and non-metals., ECF11 Conference, Stockholm, August 2004, 2004, pp324 - 334Conference Paper, 2004
• Crupi G and Taylor D, Residual stresses and fatigue prediction using the theory of critical distances., ECF11 Conference, Stockholm, August 2004, 2004, pp566 - 576Conference Paper, 2004
• Wiersma S and Taylor D, A critical distance approach applied to microscopic biomedical specimens under fatigue loading., ECF11 Conference, Stockholm, August 2004, 2004, pp768 - 778Conference Paper, 2004
• Susmel L and Taylor D, Non-propagating cracks under in-phase Mode I and II loadings., ECF11 Conference, Stockholm, August 2004, 2004Conference Paper, 2004
• Susmel L and Taylor D, La teoria delle distanze critiche per la stima del limite di fatica a torsione di componenti intagliati., "Innovazione nella Progettazione Industriale", Convegno Nazionale XIV ADM - XXXIII AIAS, Bari, Italy, Sept 2004, 2004Conference Paper, 2004
• Lee TC, O_Brien FJ, Mohsin S, Hazenberg JG, Taylor D., Microstructure and microdamage in bone, Micro- and Nanostructures of Biological Systems, Halle, edited by A Blume, H-J Hein & G Bischoff & H-J Hein , 3, Martin Luther University Halle-Wittenberg, 2004, pp9 - 12Conference Paper, 2004
• Taylor, D., "The Fatigue Crack Propagation Threshold", IDFC-2, Limerick, 1984, pp155 - 155Conference Paper, 1984
• Ponsonby, J., McCarthy, L. and Taylor, D., The Effect of Peening on Fatigue Properties, IDFC-3, Galway, 1985, 1985Conference Paper, 1985
• Hunter, C., Shuter, D. and Taylor, D., Transformation Kinetics of a Nickel-Aluminium Bronze Alloy, IDFC-3, Galway, 1985, 1985Conference Paper, 1985
• Taylor, D. and McCormack, B., Durability of Materials for Orthopaedic Implants, IDFC-5, Cork, 1987, 1987, pp35 - 35Conference Paper, 1987
• McConnell, R.J., Moriarty, C. and Taylor, D., Fracture Strength of Resin-Metal Bonds, IDFC-5, Cork, 1987, 1987, pp1 - 1Conference Paper, 1987
• Taylor, D. and McGuckian, M., "Lunar Temperature Measurements at Birr Castle", Science in Ireland 1800-1930 Tradition and Reform, TCD (Ireland), 1988, pp115 - 115Conference Paper, 1988
• Henn, G., Prendergast, P. and Taylor, D., "Assessment of a Particulate Composite Material for use in Hip Joint Prostheses", IMF6, Dublin, 1989, pp283 - 283Conference Paper, 1989
• Prendergast, P. and Taylor, D., "A Continuum Damage Approach to Bone Remodelling", IMF6, Dublin, 1989, pp301 - 301Conference Paper, 1989
• Byrne, P., Taylor, D. and Allen, D., "Fatigue Behaviour of Rough Surfaces: Some Initial Findings", IMF6, Dublin, 1989, pp95 - 95Conference Paper, 1989
• Taylor, D., Byrne, P. and Li, J., "Fatigue Analysis: the Distinction Between Cracks and Notches", IMF 7, Limerick, 1991Conference Paper, 1991
• Li, J. and Taylor, D., "Short Fatigue Cracks", IMF 7, Limerick, 1991Conference Paper, 1991
• Culleton, T.P., Prendergast, P.J. and Taylor, D., "Experimental Modelling of the Artificial Hip Joint", TUBES Spring Meeting, 1992Conference Paper, 1992
• David Taylor, Lauren Mulcahy, Gerardo Presbitero, Pietro Tisbo, Clodagh Dooley, Garry Duffy and Thomas Clive Lee, The Scissors Model of Microcrack Detection in Bone: Work in Progress, Materials Research Society Proceedings, 1274, 2010Journal Article, 2010, DOI , URL , TARA - Full Text
• P.J.Prendergast, H.Weinans, R.Huiskes and D.Taylor, "Bone structure and dynamics of bone adaptation in response to accumulative damage", Key Engineering Materials, 86-87, 1993, pp187 - 192Conference Paper, 1993
• Taylor, D., Review of "Materials Data for Cyclic Loading", by Boller and Seeger , "Metals and Materials", 1988, p640Review, 1988
• Taylor, D., Tanaka, et al, Review of Statistical Research on Fatigue and Fracture", "Metals and Materials", 1989Review, 1989
• Taylor, D., Review of "Biomechanics: Materials - A Practical Approach", , by Vincent et al , Metals and Materials, 1993Review, 1993
• Taylor, D. and Bonadio, F., "The Body Builders", Technology Ireland, 1992, p32 - 35Journal Article, 1992
• Taylor, D. and Lee, T.C., "Formation of a Bioengineering Section", Irish Journal of Medical Science, 163, 1994, p447Journal Article, 1994
• Fatigue in Biological Structures and Biomaterials in, editor(s)KHJ Buschow, RW Cahn, MC Flemings et al. , Encyclopedia of Materials: Science and Technology, Elsevier, 2001, pp2951 - 2955, [Taylor D.]Book Chapter, 2001
• Prendergast PJ, Murphy BP and Taylor D., Discarding specimens for fatigue testing of orthopaedic bone cement: a comment on Cristofolini et al... , Fatigue Fract Engng Mater Struct, 25, 2002, p315 - 316Journal Article, 2002
• Taylor, D, Comment on "Notch Size Effects in the Fatigue Limit of Steel" by M.Makkonen., 2003, -Miscellaneous, 2003
• David Taylor, Niamh O'Mara, Eoin Ryan, Michael Takaza, Ciaran Simms, The fracture toughness of soft tissues, Journal of the Mechanical Behavior of Biomedical Materials, 6, 2012, p139-147Journal Article, 2012, DOI , URL , TARA - Full Text
• Susmel L and Taylor D, Taking full advantage of nominal stresses to design notched components against variable amplitude multiaxial fatigue, Key Engineering Materials, 488-489, 2012, p747 - 750Journal Article, 2012, DOI
• Susmel L and Taylor D, A critical distance/plane method to estimate finite life of notched components under variable amplitude uniaxial/multiaxial fatigue loading, International Journal of Fatigue, 38, 2012, p7 - 24Journal Article, 2012, DOI
• Dooley C, Tisbo P, Lee TC and Taylor D, Rupture of osteocyte processes across microcracks: the effect of crack length and stress, Biomechanics and Modeling in Mechanobiology , 11, 2012, p759 - 766Journal Article, 2012, TARA - Full Text
• Presbitero G, O'Brien FJ, Lee TC and Taylor D, Distribution of microcrack lengths in bone in vivo and in vitro, Journal of Theoretical Biology , 304, 2012, p164 - 171Journal Article, 2012, DOI
• Dirks J-H and Taylor D , Fracture toughness of locust cuticle, Journal of Experimental Biology , 215, 2012, p1503 - 1508Journal Article, 2012, TARA - Full Text
• Dirks J-H and Taylor D , Veins improve fracture toughness of insect wings, PLoS ONE , 7, 2012, pe43411Journal Article, 2012, DOI , TARA - Full Text
• Susmel L and Taylor D , Sulla stima di macro, micro e nano-durezza di materiali metallic mediante analisi elasto-plastiche agli elementi finite (Estimating macro, micro and nano-hardness of metallic materials from elasto-plastic finite element results). , Frattura ed integrita strutturale , 19, 2012, p37 - 50Journal Article, 2012
• Taylor D and Dirks J-H , Shape optimization in exoskeletons and endoskeletons: a biomechanics analysis, Journal of the Royal Society Interface , 9, 2012, p3480 - 3489Journal Article, 2012, DOI
• Susmel L and Taylor D , The theory of critical distances to estimate finite lifetime of notched components subjected to constant and variable amplitude torsional loading, Engineering Fracture Mechanics , 98, 2013, p64 - 79Journal Article, 2013
• Taylor, David, Art in Fracture: The making of the new cover for Theoretical and Applied Fracture Mechanics, Theoretical and Applied Fracture Mechanics, 2014Journal Article, 2014, TARA - Full Text
• Dooley, C., Cafferky, D., Lee, T.C., Taylor, D., Fatigue failure of osteocyte cellular processes: Implications for the repair of bone, European Cells and Materials, 27, 2014, p39-49Journal Article, 2014
• Benedetti, M., Fontanari, V., Bergamini, D., Bandini, M., Taylor, D., Multiaxial fatigue resistance of shot peened high-strength aluminium alloys, Conference Proceedings of the Society for Experimental Mechanics Series, 8, 2014, p235-243Journal Article, 2014, DOI
• Benedetti, M., Fontanari, V., Bandini, M., Taylor, D., Multiaxial fatigue resistance of shot peened high-strength aluminum alloys, International Journal of Fatigue, 61, 2014, p271-282Journal Article, 2014, DOI
• Tisbo, P., Taylor, D., Simulation of microcrack growth and repair in living bone, WIT Transactions on Biomedicine and Health, 17, 2013, p193-203Journal Article, 2013, DOI
• Dirks, J.-H., Parle, E., Taylor, D., Fatigue of insect cuticle, Journal of Experimental Biology, 216, (10), 2013, p1924-1927Journal Article, 2013, DOI
• Reilly, G., Taylor, D., Application of General Linear Modeling (GLM) to analysis of indentation in compact bone, AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, 2012, p153-160Journal Article, 2012
• Taylor, D. , The "House Style" of JMBBM (Editorial), 2012, - iiiMiscellaneous, 2012, DOI
• Taylor, D., Two special issues: Natural materials and ICMOBT-3 proceedings, Journal of the Mechanical Behavior of Biomedical Materials, 4, (5), 2011, p625Journal Article, 2011, DOI
• Greene, S., Taylor, D., McElarney, Y.R., Foy, R.H., Jordan, P., An evaluation of catchment-scale phosphorus mitigation using load apportionment modelling, Science of the Total Environment, 409, (11), 2011, p2211-2221Journal Article, 2011, DOI
• Qin, J., Taylor, D., Atahan, P., Zhang, X., Wu, G., Dodson, J., Zheng, H., Itzstein-Davey, F., Neolithic agriculture, freshwater resources and rapid environmental changes on the lower Yangtze, China, Quaternary Research, 75, (1), 2011, p55-65Journal Article, 2011, DOI
• Taylor, D., The words we use, Journal of the Mechanical Behavior of Biomedical Materials, 4, (1), 2011, p1Journal Article, 2011, DOI
• Taylor, D. , Introducing Our New Associate Editor: Pekka Vallittu (Editorial), 2011, - 128Miscellaneous, 2011
• Naili, S., van Rietbergen, B., Sansalone, V., Taylor, D. , Bone remodeling, 2011, - 827-828Miscellaneous, 2011, DOI
• Taylor, D. , Do Editors Make a Difference?, 2011, - 921Miscellaneous, 2011, DOI
• Taylor, D. , A most excellent conference, 2010, - 415Miscellaneous, 2010, DOI
• Taylor, D. , An impact factor for JMBBM, 2010, - 479Miscellaneous, 2010, DOI
• Taylor, D., What do you do with your data?, 2010, - 291Miscellaneous, 2010, DOI
• Taylor, D., On Reviews and Reviewers, 2010, - 229Miscellaneous, 2010, DOI
• Taylor, D., Together and Apart: Collegiality and Individuality in Research Centres, Journal of the Mechanical Behavior of Biomedical Materials, 3, (2), 2010, p135Journal Article, 2010, DOI
• Taylor, D., Different Types of Article in JMBBM, Journal of the Mechanical Behavior of Biomedical Materials, 3, (1), 2010, p1Journal Article, 2010, DOI
• Taylor, D., Kasiri, S., A critical distance analysis of the effect ofcrack length on toughness and fatigue in compact bone, Proceedings of the ASME Summer Bioengineering Conference, SBC2008, (PART A), 2009, p241-242Journal Article, 2009
• , The role of stress concentrations in the bone cement mantle, edited by df , (PART A), 2009, pp463-464Conference Paper, 2009
• Lee, T.C., Taylor, D., Lies, damned lies and case studies, Journal of the Mechanical Behavior of Biomedical Materials, 2, (5), 2009, p409Journal Article, 2009, DOI
• Oyen, M., Taylor, D., Special issue on nanoindentation of biological materials, Journal of the Mechanical Behavior of Biomedical Materials, 2, (4), 2009, p311Journal Article, 2009, DOI
• Carpinteri, A., Cornetti, P., Pugno, N., Sapora, A., Taylor, D., Generalized fracture toughness for specimens with re-entrant corners: Experiments vs. theoretical predictions, Structural Engineering and Mechanics, 32, (5), 2009, p609-620Journal Article, 2009
• Taylor, D., ICMOBT: The international conference on the mechanics of biomaterials and tissues, Journal of the Mechanical Behavior of Biomedical Materials, 2, (2), 2009, p129Journal Article, 2009, DOI
• Taylor, D., Kruzic, J.J., Ritchie, R.O., Papers from the International Conference on the Mechanics of Biomaterials and Tissues, International Journal of Fatigue, 29, (6), 2007, p991Journal Article, 2007, DOI
• Kennedy, O.D., Brennan, O., Rackard, S.M., Staines, A., O'Brien, F.J., Taylor, D., Lee, T.C., Effects of ovariectomy on bone turnover, porosity, and biomechanical properties in ovine compact bone 12 months postsurgery, Journal of Orthopaedic Research, 27, (3), 2009, p303-309Journal Article, 2009, DOI
• Taylor, D., Interdisciplinary research: Easy, or hard?, 2009, - 1-2Miscellaneous, 2009, DOI
• (ed.), Fatigue in PMMA: The effect of notches and pores predicted using the TCD, 2, 2008, 1570-1575 pProceedings of a Conference, 2008
• David Taylor, 'Cover Painting for the journal "Theoretical and Applied Fracture Mechanics"', Elsevier, 2014, -Visual art production, 2014
• Jennings, E., Allott, N., Lenihan, D, Drivers of long-term trends and seasonal changes in total phosphorus loads to a mesotrophic lake in the west of Ireland, Marine and Freshwater Research, 64, (5), 2013, p413 - 422Journal Article, 2013

• Olivia Hassett and David Taylor, 'Exo Endo', Trinity College Dublin, 2015, -Exhibition
• Hoey D, Taylor D and O'Reilly P, Predicting fatigue failure in bone cement, Bioengineering in Ireland 12, Galway, January 2006, edited by P.McHugh , Royal Academy of Medicine in Ireland, 2006, pp43-Conference Paper
• Hoey D, Taylor D and O'Reilly P, The role of defects in the fatigue strength of bone cement, Bioengineering in Ireland 13, Enniskillen, Northern Ireland, January 2007, edited by Orr J , RAMI, 2007, pp53-Conference Paper
• Taylor, D., "Fatigue Crack Propagation at Slightly Elevated Temperatures", IDFC-1, Dublin, 1983, pp143-Conference Paper
• O'Connor, B.P. and Taylor, D., "Weld Simulations in Aluminium Bronze" , IDFC-2, Limerick, 1984, pp91 - 91Conference Paper
• McCormack, B., Moalic, J-M. and Taylor, D., "Carbon Fibre Reinforced Polymers in Hip Joint Prostheses", IDFC-4, Belfast, 1986, 1986, pp273 - 273Conference Paper
• Leonard, C., Bryce, D. and Taylor, D., "Heat Treatment of Aluminium Bronzes", IDFC-4, Belfast, 1986, 1986, pp285 - 285Conference Paper
• Culleton, T. and Taylor, D., "Fatigue in the Artificial Hip Joint: Simulation and Observation", IMF 7, Limerick, 1991Conference Paper
• Prendergast, P.J., McCormack, B. and Taylor, D., "Stress Analysis and Materials Selection for Hip Prosthesis Design", TUBES Spring Meeting, 1992Conference Paper
• Culleton, T.P., Prendergast, P.J. and Taylor, D., "Problems Associated with Experimental Accelerated Fatigue Testing of the Artificial Hip Joint", Key Engineering Materials, 86-87, 1993, pp199 - 206Conference Paper
• Looney, L., Hurst, R.C. and Taylor, D., "The Development of Methods for Assessing the Creep crack Growth Behaviour of Materials in Elevated Temperature, Hydrogen Service", Key Engineering Materials, 86-87, 1993, pp33 - 40Conference Paper
• Prendergast, P.J., McCormack, B.A.O. and Taylor, D., "Innovation Initiatives in Bioengineeering - The Design Forum", Lean Production, From Concept to Product, edited by A.Storrar , QUB, 1994, pp319 - 325Conference Paper
• Dolan, F., Taylor, D. and Blackie, P., "HIPS: Rubber phase volume and particle size effects on monotonic tensile properties", Lean Production, From Concept to Product, edited by A.Storrar , QUB, 1994Conference Paper
• McNamara, B., Toni, A. and Taylor, D., "Effects of implant material properties and implant-bone bonding on stress shielding in cementless total hip arthroplasty", , Lean Production, From Concept to Product, edited by A.Storrar , QUB, 1994Conference Paper
• Taylor, D., Prendergast, P.J. and McNamara, B.P., "Fatigue in Bone: Modelling the Growth of Short Cracks", TUBES Spring meeting, 1995, pp7 - 7Conference Paper
• Lyons, G., Brady, C., Taylor, D. and O'Brien, M., "Rear-end Impacts and Temporomandibular Joint Injury", TUBES Spring meeting, 1995, pp6 - 6Conference Paper
• Byrne, P.A.S. and Taylor, D., "Fatigue Design": Allowing for Surface Finish, IMC12, Cork, 1996Conference Paper
• Olivia Hassett and David Taylor, 'The Art and Science of Process', 2014, -Visual art production

Research and Professional Activities 1) Fatigue and Fracture of Materials and Components The study of fatigue failure and other mechanisms of fracture in metals and other materials. Fatigue crack propagation and fracture mechanics; fatigue life prediction of components; use of finite element analysis; the behaviour of stress concentrations. 2) Forensic Engineering Failure analysis and metallurgical examination of components for forensic purposes. Consultancy work to engineering companies on component design and life prediction. 3) Bioengineering The assessment of materials for use in human-body implants and other biomaterials. Fatigue and fracture properties of material in humans, animals and plants. Damage and repair in living organisms.

• Title

  Bone Mechanics
  Summary

  Investigations into the strength and fracture of bone, including repair and adaptation. Theoretical modelling and experimental studies
  Date From

  Ongoing
• Title

  Mechanical Properties of Insect Cuticle
  Summary

  Investigations into structure/property/morphology relationships in cuticle as found in insect legs, wings etc, with particular reference to fracture mechanics and fatigue
  Date From

  Ongoing
• Title

  The Theory of Critical Distances
  Summary

  Development of new approaches in fracture mechanics, using theoretical analysis and experimental testing
  Date From

  Ongoing

• Haughton Medal (Royal Academy of Medicine in Ireland) 2006

• Fellow, Royal Academy of Medicine in Ireland (President, Bioengineering Section 1994-1996)
• Director of the Association of Consulting Forensic Engineers
• Chartered Engineer
• Fellow of the Institute of Engineers of Ireland
• Member of the Board of Directors of Medisolve, Ltd., an Irish healthcare consultancy company. 1997
• Member of the Royal Irish Academy